Medline Industries

The Babi.Plus Bubble PAP Valve provides a convenient, cost-effective means to apply positive airway pressure. The intuitive, standardized design allows the clinician to focus more on patient care, and less on the device. The design delivers accuracy and stability throughout the course of therapy.Features: * 360° swivel inlet connector accepts 15 O.D. and 22 mm I.D. expiratory circuit connectors * Positive engagement reduces the risk of inadvertent change * Water level adjustment port allows water to be added or removed without disconnecting the expiratory circuit * Gas discharge ports direct gas away from clinician * Rotating pressure adjustment lever

Pressure relief manifold for Babi.Plus PAP Valve system.

Designed to reduce environmental contamination during aerosol therapy. Features: * Inspiratory and expiratory flow are isolated by one-way valves * Exhalation flow directed through an efficient filter system * Anti-spill UP-DRAFT II OPTI-NEB™ nebulizer produces fine, dense particles * High-output, 8cc nebulizer operates vertically or at a 45° angle * Optimum particle size for deposition System includes: * Nebulizer * 3 one-way valves * 6 inch aerosol tube * 2 tee pieces * Mouthpiece * Filter * 7 feet of supply tubing

SMOOTH-FLO® CORR-A-TUBE® disposable tubing has a smooth internal surface to help prevent water from collecting in ridges. Its 22mm inside diameter end fitting adapts to most respiratory therapy applications.

The MICRO MIST small volume nebulizer is designed for performance and economy. It can be used for hand-held or in-line treatments. Due to its inventive capillary design it can deliver a consistent fine, dense mist at any angle up to 90°, thus patients can be treated from upright to supine positions. Optimal particle size (2.7 micron MMAD), efficient nebulization rates and minimal residuals result in effective pulmonary deposition. An easy-seal threaded cap and a 6 ml capacity anti-spill jar prevent leakage and ensure easy assembly/disassembly. A minimum of components and a clearly marked jar enable quick preparation and start-up. MICRO MIST is available separately or with a wide variety of components, according to customer needs. Graduated cc markings allow for easy observation and control of medication usage.

Elbow Adaptor, 22mm ID x 22mm OD

Nipple and Nut, Barbed Hose Adaptor for Standard DISS Threaded Oxygen Outlet

Oxygen Supply Tubing Connector, Ribbed, Couples O2 Supply Tubing Utilizing 5mm to 7mm End Connectors

Universal Cuff Adapter * Standard * 22mm ID * Female Connections

* Standard * 15 mm ID x 22 mm OD connections

Teleflex offers an extensive line of Hudson RCI® Adaptors.

The Hudson RCI LVE (lung volume exerciser) encourages deep, prolonged inspiration.Features: * Wide flow rate range from 200 - 1200cc/sec * Adjustable, clearly marked flow settings * Dual-chamber design to create a constant resistance that lifts the ball when patient maintains inspirations equal to the selected inspiratory flow setting

AQUAPAK® prefilled nebulizer is a versatile sterile system to provide cold or heated nebulization. It is a closed sterile water system. Benefits: * Increased safety in hygienic application * Facilitates daily handling * Efficiency and economy * Delivers humidified gas in concentrations ranging from 28% to 98%

Pressure Line Adaptor * 22mm OD x 22mm ID * Elbow: * Accepts 5-7mm ID Tubing * Swivels 360 Degrees

AQUAPAK® prefilled humidifiers combine an easy-to-use adapter with choice of two sterile water reservoir bottle sizes. The micro-diffuser produces smaller bubbles and greater surface agitation for quiet operation and high humidity output. Humidifier adapters incorporate audible alarm to alert clinician to flow restriction or occlusion of humidifier or tubing. Reservoir bottles have built-in oxygen tubing connectors.

* Low flow resistance in one direction * 22mm OD to 22mm ID * Individually Packaged

The Neb-U-Mask® is a combination device that allows for the concurrent delivery of aerosolized medications and high concentrations of oxygen or heliox. The system is composed of an innovative wye design featuring a nebulizer connection and MDI adaptor, a high concentration mask and a 750 ml gas reservoir bag. The nebulizer connection features a valved port, which maintains a closed system when the neb is not in use.

The Pocket Chamber incorporates a unique one-way valve between the patient mouthpiece and the chamber body. This highly sensitive, four-leafed silicone valve opens easily and provides little resistance to airflow while preventing patients from inadvertently blowing medication out of the back of the chamber. The one-way valve also aids patients that have difficulty timing their inhalation after actuating the MDI canister.Features: * Compact, anti-static chamber with unique four-leaf silicone one-way valve * Fits virtually all major metered dose inhaler * Built-in whistle alarm helps optimize inspiratory rate * Anti-static features enhances drug delivery by minimizing drug adherence to chamber wall * 100% latex free

This aerosol mask is designed for infant patients and is made of plastic. It is an under the chin mask type. Features: * Aerosol Mask * Infant * Under the Chin * Plastic * Single Use * Non-Sterile

Sterile water reservoir is part of the CONCHAPAK® self-contained water and humidification cartridge system, which is used exclusively with CONCHATHERM® humidifiers.

AQUAPAK® prefilled humidifiers combine an easy-to-use adapter with choice of two sterile water reservoir bottle sizes. The micro-diffuser produces smaller bubbles and greater surface agitation for quiet operation and high humidity output. Humidifier adapters incorporate audible alarm to alert clinician to flow restriction or occlusion of humidifier or tubing. Reservoir bottles have built-in oxygen tubing connectors.

Venturi-style adaptor for AQUAPAK® Nebulizers allows the selection of oxygen concentrations from 28% to 98%.

The AQUATHERM® III is an adjustable, external heater electronic heater for thermal humidification (nebulization) to be used with AQUAPAK® Nebulizer systems.

The Hudson RCI infant nasal prong continuous positive airway pressure (CPAP) cannula system is designed to reduce trauma associated with the delivery of infant nasal CPAP. Soft anatomically curved prongs minimize nasal septal necrosis. Adjustable right-angle connector facilitates positioning of tubing to increase infant comfort. System includes: * Cannula * One inspiratory and one expiratory elbow * Two 4ft lengths of 10mm ID corrugated tubing * One 4ft pressure monitoring line * One 22mm to 10mm humidifier adapter * One knit cap * Two 6 inch sections of Velcro securing tape