Small Volume Nebulizers

Aerosol nebulizer therapy with the comfort of a mask. Kits come complete with mask, medication chamber and 7ft of star lumen oxygen supply tubing. Features: * Made of PVC * 7ft Star Lumen tubing * Adult Mask included

This Curaplex® handheld, small-volume nebulizer provides ideal particle size distribution, allowing high lung deposition. It can be used in an upright position or angled up to 45 degrees. Features and Benefits: * Anti-spill T-piece * Leak proof seal * Very low dead volume (0.7 cc) * High medication bowl capacity (13 cc) * Graduated volume marking on bowl

The VixOne™ small-volume, high-output nebulizer has an anti-spill "T" design and nebulizes in upright and angled positions. The Nebulizer Kit includes: Nebulizer (unassembled), extension assembly, 2 inch flixible PVC tube, 7 foot gas supply tubing, infant extension, and flex adaptor. Features: * Very low dead volume (0.7 cc) * High medication bowl capacity (10 cc) * Graduated volume (cc) markings on the bowl

Small Volume Jet Nebulizers provide reliable aerosol therapy. The anti-drool t-piece option allows for extended, uncontaminated use. The high output of the t-piece provide a treatment time of under 7 minutes. Available in multiple configurations, these nebulizers offer reliable therapy both in hospital and at home. Features: * Ready to use kits feature multiple options: * O2 supply tubing * Trumpet or thread grip connector * Reservoir tubing * T-Piece connector * Mouthpiece * Pediatric or Adult mask * Disposable * Latex-free * Single Patient Use

AirLife® Respirgard II filtered nebulizer system is suitable to deliver most any kind of aerosolized respiratory medication. Its design and configuration help minimize the environmental impact of any aerosolized medication compared to a standard small volume nebulizer. Features: * Baffled Tee * Flex Tube * 7ft Oxygen Tubing * Mouthpiece * One-way valves * Expiratory filter

The Circulaire™ nebulizer utilizes a one-way valve in the breathing circuit along with an expandable reservoir bag. The reservoir bag acts as a holding chamber for the nebulized medication and prevents the aerosol particles from being vented to the atmosphere. The one-way valve holds the aerosol inside the reservoir bag until the patient actively inhales. It aerosolizes medication into a particle size that is between 0.9 and 1.2 microns. It also includes a resistor cap on the exhalation side, enabling the severe COPD patient to replicate pursed lip breathing when desired. The pie-shaped opening is adjustable for patient comfort and enhanced medication delivery.

The Circulaire II is a versatile and universal pulmonary drug delivery system. The swivel mask alleviates cumbersome posturing and allows you to accommodate your patient’s position. The system includes a detachable reservoir bag. Bag replacement simplifies the delivery of a variety of aerosolized medicines such as bronchodilator therapy, antibiotic therapy, mucolytics, antifungals, etc.     

The Micro Cirrus nebulizer has been specifically designed to create a small particle aerosol with a mass median diameter (MMD) of 1.2 microns. At a driving gas flow of 8L/min 90% of the particles will be less than 2 microns in diameter to give alveolar deposition.

The Cirrus™2 Nebulizer is based on the well-established Cirrus nebulizer, yet it incorporates several improved features. These features include a graduated nebulizer cup to provide guidance on how much medication is in the nebulizer. The cup, in turn, now has a quick release fitting to enable the nebulizer to be attached and detached with a quarter turn. This speeds up the filling process and provides a reliable seal between the cup and the nebulizer body. The Cirrus™2 mask kits incorporate the Intersurgical EcoLite™ aerosol mask, this non-PVC mask reduces the environmental impact of this product. Features: * Quick release fitting for easy attachment and detachment of the cup to nebulizer * Standard 22ID Taper fits masks, T-pieces, and mouthpieces * Graduated nebulizer cup guide for faster preparation * Low residual volume reduces medication waste

The MICRO MIST small volume nebulizer is designed for performance and economy. It can be used for hand-held or in-line treatments. Due to its inventive capillary design it can deliver a consistent fine, dense mist at any angle up to 90°, thus patients can be treated from upright to supine positions. Optimal particle size (2.7 micron MMAD), efficient nebulization rates and minimal residuals result in effective pulmonary deposition. An easy-seal threaded cap and a 6 ml capacity anti-spill jar prevent leakage and ensure easy assembly/disassembly. A minimum of components and a clearly marked jar enable quick preparation and start-up. MICRO MIST is available separately or with a wide variety of components, according to customer needs. Graduated cc markings allow for easy observation and control of medication usage.

The AirLife® brand Misty Max 10™ disposable nebulizers deliver fast and effective treatment more efficiently to a wide range of patients. They feature a one-piece jet design that delivers high output rates, resulting in faster treatment times and consistent medication delivery.A full 10cc capacity provides medication dosing flexibility. The anti-spill design helps prevent medication waste and allows the unit to be used at an angle to accommodate various patient positions.* An advanced jet design for fast treatment times* Provide fine particles with a tighter distribution (higher percentage of respirable particles) than conventional nebulizers

Developed by a pediatric nurse practitioner, the VixOne™ PediNeb™ small volume nebulizer enhances the delivery of aerosolized medication while reducing the apprehension encountered by young patients. It features a pacifier to help calm infants and toddler during aerosol treatment. Medication is inhaled through the nose, not the mouth. A medication port directs aerosolized medication to the nose, eliminating medication waste associated with the ”blow-by” technique.

LC® Plus Nebulizer Set features include: * Reusable * Tubing * Adapter * Mouthpiece

NebuTech® HDN® Disposable Nebulizer features include:* Integral anti-drool feature incorporated* Patented "cone" design with larger surface area coupled with a more efficient flow-through chamber* Nebulizes 3 cc in less than 10 minutes in horizontal or vertical position* Particle size distribution within the desired respirable range. 80% below 5 microns* Incorporates one-way valves at the inlet and outlet paths* Removable green colored cone* Single Patient Use

The Neb-U-Mask® is a combination device that allows for the concurrent delivery of aerosolized medications and high concentrations of oxygen or heliox. The system is composed of an innovative wye design featuring a nebulizer connection and MDI adaptor, a high concentration mask and a 750 ml gas reservoir bag. The nebulizer connection features a valved port, which maintains a closed system when the neb is not in use.     

Our large volume Misty Ox® nebulizers are designed for continuous aerosol therapy at high flow rates to meet even the most challenging patient’s inspiratory demands.Features:* High flow nebulizer* 60 percent - 96 percent FiO2 range* Primary jet flow range 40 LPM* 42-80 LPM total flow range* Ambient entrainment* Standard straw* Yellow dial* One gas source required

Our large volume Misty Ox® nebulizers are designed for continuous aerosol therapy at high flow rates to meet even the most challenging patient’s inspiratory demands. Features: * Gas injection nebulizer * 21 percent - 100 percent FiO2 range* Two gas sources required

LC® D Nebulizer Set features include: * Disposable * Tubing * Mask

Designed to reduce environmental contamination during aerosol therapy. Features: * Inspiratory and expiratory flow are isolated by one-way valves * Exhalation flow directed through an efficient filter system * Anti-spill UP-DRAFT II OPTI-NEB™ nebulizer produces fine, dense particles * High-output, 8cc nebulizer operates vertically or at a 45° angle * Optimum particle size for deposition System includes: * Nebulizer * 3 one-way valves * 6 inch aerosol tube * 2 tee pieces * Mouthpiece * Filter * 7 feet of supply tubing

For administration of small volume nebulizer therapy during neonatal mechanical ventilation with 10mm ID circuits. Includes: * Up-Draft II OPTI-NEB™ Nebulizer * One 12 inch section of 10mm corrugated tubing * 22mm OD/18mm ID x 10mm nebulizer adaptor * 10mm x 7.5mm connector * 10mm x 10mm OD neonatal tee * 7 feet oxygen supply tubing

Bitrex™ Fit Test Nebulizer #2 designed to comply with OSHA standards for qualitative fit testing.