Suction Regulators

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Gauge Range: PM3300: 0-200mmHg - Full Vacuum PM3300HV: 0-300mmHg - Max Vacuum PM3400: 0-150mmHg * Gauge Accuracy: Analog: ± 5% of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * Vacuum Ports: 1/8 NPT Female * Modes: LINE, OFF, REG * Maximum Vacuum: PM3300: REG. Mode @ Full Vac - 396 mmHg PM3400: Restricted to 170 mmHg (23 kPa) ± 10 mmHg * Weight: 1.1 lbs * Dimensions: 3.7in L x 2.8in W x 5.2in H * Battery: 3 Volt Lithium, ½ AA (Digital Vacuum Gauge Models ONLY)

Preset your desired suction level. When activated, the preset level and gauge reading can be used to check for system leaks. The case is made of ABS plastic and houses the gauge for extra protection. Specifications: * Gauge Accuracy: Analog: ± 5 % of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. Indicator * Vacuum Ports: 1/8 NPT Female * Modes: LINE - OFF - REG * Maximum Vacuum: PM3300: REG. Mode @ Full Vac - 396 mmHg (53 kPa) PM3400: Restricted to 170 mmHg (23 kPa) ± 10 mmHg (1.3 kPa) * Weight: 1.1 lbs. (.48 kg) * Dimensions: Length: 3.7 in. (9.4 cm), Width: 2.8 in. (7.1 cm), Height: 5.2 in. (13.2 cm) * 3 Volt Lithium, ½ AA (Digital Vacuum Gauge Models ONLY)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Bottom Connection (inlet) - Tubing Nipple * Gauge Range: 0-300mmHg - Full Vacuum * Gauge Accuracy:Analog: ± 5% of MaxDigital Gauge: ± 1% of Full ScaleAnalog Gauge: ± 5% of MAX within ref. indicator * Maximum Vacuum:REG. Mode @ Full Vac - 396 mmHg * Weight: 1.1 lbs. (.48 kg) * Dimensions: 3.7 in. (9.4 cm), 2.8 in. (7.1 cm), 5.2 in. (13.2 cm)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Gauge Range: PM3000: 0-200mmHg PM3000HV: 0-300mmHg PM3100: 0-200mmHg PM3100HV: 0-300mmHg PM3500: 0-150mmHg PM3500E 0-200mmHg * Gauge Accuracy: Analog: ± 5% of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * Vacuum Ports: 1/8 NPT Female * Modes: PM3100 Series: LINE, OFF, REG PM 3000 & PM3500 Series: OFF, REG * Maximum Vacuum: PM3000 & PM3100: REG. Mode @ Full Vac - 396 mmHg PM3500D: Restricted to 170 mmHg (23 kPa) ± 10 mmHg PM3500E: Restricted to 160 mmHg (21 kPa) ± 10 mmHg * Weight: 1.1 lbs * Dimensions: 3.7 in L x 2.8 in W x 5.2 in H * Battery: 3 Volt Lithium, ½ AA (Digital Vacuum Gauge Models ONLY)

The PMX3600 Series Continuous 3 Mode Large Gauge Vacuum Regulator features a unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. The case is made of strong plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. Large gauge size makes it easy to see suction pressure. The PMX Series gauge is 50% larger than the PM Series gauge. The large control knob and easy-to-read settings make vacuum adjustments simple, even in emergency situations. For additional configurations, please contact your account manager Features: * Analog or Digital Gauge * Continuous 3 Mode Vacuum Regulator * 0-760 mmHg Gauge Range * Ohmeda Quick Connect Vacuum Source Connection * Wide Range of Patient Connections * Gauge Accuracy * Analog: ± 5% of MAX * Digital Gauge: ± 1% of Full Scale

Vac Trap features include: * Shatter Resistant Trogamid Bottle * Lightweight Nylon Float * Positive Shut-Off Disc Seal * Designed for Easy Disassembly * Hose Barb

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Bottom Connection (inlet) - Ohmeda Style Trap Bottom * Gauge Range: 0-300mmHg - Full Vacuum * Gauge Accuracy:Analog: ± 5% of MaxDigital Gauge: ± 1% of Full ScaleAnalog Gauge: ± 5% of MAX within ref. indicator * Maximum Vacuum:REG. Mode @ Full Vac - 396 mmHg * Weight: 1.1 lbs. (.48 kg) * Dimensions: 3.7 in. (9.4 cm), 2.8 in. (7.1 cm), 5.2 in. (13.2 cm)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob and easy-to-read settings make vacuum adjustments simple, even in emergency situations. The Pediatric vacuum regulator is restricted to 170 mmHg (±10 mmHg) to prevent high vacuum situations and the gauge face is imprinted with the Precision Medicals ”Stork Symbol” to identify the unit for pediatric applications. Key Benefits: * Bottom Connection (inlet) - None * Gauge Range: PS3300: 0-200 mmHg and ”Full Vacuum” PS330HV: 0-300mmHg and ”Max Vacuum” * Gauge Accuracy: Analog: ± 5% of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * PreSet Range: ±10mmHg of setting * Modes: OFF - REG - INT * Maximum Vacuum: REG. Mode @ Full Vac- 396 mmHg * Weight: 1.2 lbs. (.56 kg) * Dimensions: 4.4 in. (11.2 cm), 2.8 in. (7.1 cm), 5.3 in. (13.4 cm)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of eight (8) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Key Benefits: * Bottom Connection (inlet) - DISS Male * Gauge Range: 0-200 mmHg and “Full Vacuum” 0-300mmHg and ”Max Vacuum” * Gauge Accuracy: Analog: ± 5% of Max Digital/Analog: Digital Display: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * Preset Range: ±10mmHg of setting * Maximum Vacuum: REG. Mode @ Full Vac - 396 mmHg * Weight: 1.2 lbs. (.56 kg) * Dimensions: 4.4 in. (11.2 cm), 2.8 in. (7.1 cm), 5.3 in. (13.4 cm)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Bottom Connection (inlet) - 1/8 inch NPTF * Gauge Range: 0-300mmHg - Full Vacuum * Gauge Accuracy:Analog: ± 5% of MaxDigital Gauge: ± 1% of Full ScaleAnalog Gauge: ± 5% of MAX within ref. indicator * Maximum Vacuum:REG. Mode @ Full Vac - 396 mmHg * Weight: 1.1 lbs. (.48 kg) * Dimensions: 3.7 in. (9.4 cm), 2.8 in. (7.1 cm), 5.2 in. (13.2 cm)

The PMX3400 Series Continuous-Intermittent 3 Mode Large Gauge Vacuum Regulators provide reliable and accurate cycling of the regulator On and Off during the intermittent suctioning. The Continuous-Intermittent 3 Mode series has a peak vacuum limit feature to prevent adjusting the vacuum too high. This series is ideal for sensitive applications where limiting Max vacuum is critically important. The intermittent timing cycle is factory set at 16 seconds on and 8 seconds off. The unique modular design makes repair a breeze for any biomed or central supply department. The PMX3400 Series Continuous-Intermittent 3 Mode Large Gauge Vacuum Regulators is made up of eight (8) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. The case is made of strong plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. Large gauge size makes it easy to see suction pressure. The PMX Series gauge is 50% larger than the PM Series gauge. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. The Pediatric vacuum regulator is restricted to 170 mmHg (±10 mmHg) to prevent high vacuum situations and the gauge face is imprinted with the Precision Medical's 'Stork Symbol” to identify the unit for pediatric applications. For additional configurations, please contact your account manager Features: * Analog or Digital Gauge * Continuous-Intermittent 3 Mode Vacuum Regulator * 0-150 mmHg Gauge Range * Puritan-Bennett Quick Connect Vacuum Source Connection * Wide Range of Patient Connections * Gauge Accuracy * Analog: ± 5% of MAX * Digital Gauge: ± 1% of Full Scale

The PMX3300 Series Continuous-Intermittent 3 Mode provides reliable and accurate cycling of the regulator On and Off during the intermittent suctioning and has a peak vacuum limit feature to prevent adjusting too high. This series is ideal for sensitive applications where limiting Max vacuum is critically important. The intermittent timing cycle is factory set at 16 seconds on and 8 seconds off. The unique modular design makes repair a breeze for any biomed or central supply department with each unit made of eight (8) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable. The case is made of strong plastic and features a smooth surface with rounded corners for easy cleaning and houses the gauge for extra protection. Large gauge size makes it easy to see suction pressure. The PMX3300 Series Continuous-Intermittent 3 Mode gauge is 50% larger than the PM Series gauge. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. The Pediatric vacuum regulator is restricted to 170 mmHg (±10 mmHg) to prevent high vacuum situations and the gauge face is imprinted with the Precision Medical's 'Stork Symbol” to identify the unit for pediatric applications. For additional configurations, please contact your account manager. Features: * Analog or Digital Gauge * Continuous-Intermittent 3 Mode * 0-200 or 0-300 mmHg Gauge Range * Gauge Accuracy * Analog: ± 5% of MAX * Digital Gauge: ± 1% of Full Scale * Chemetron Quick Connect Vacuum Source Connection * Wide Range of Patient Connections

The PMX3300 Series Continuous-Intermittent 3 Mode provides reliable and accurate cycling of the regulator On and Off during the intermittent suctioning and has a peak vacuum limit feature to prevent adjusting too high. This series is ideal for sensitive applications where limiting Max vacuum is critically important. The intermittent timing cycle is factory set at 16 seconds on and 8 seconds off. The unique modular design makes repair a breeze for any biomed or central supply department with each unit made of eight (8) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable. The case is made of strong plastic and features a smooth surface with rounded corners for easy cleaning and houses the gauge for extra protection. Large gauge size makes it easy to see suction pressure. The PMX3300 Series Continuous-Intermittent 3 Mode gauge is 50% larger than the PM Series gauge. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. The Pediatric vacuum regulator is restricted to 170 mmHg (±10 mmHg) to prevent high vacuum situations and the gauge face is imprinted with the Precision Medical's 'Stork Symbol” to identify the unit for pediatric applications. For additional configurations, please contact your account manager. Features: * Analog or Digital Gauge * Continuous-Intermittent 3 Mode * 0-200 or 0-300 mmHg Gauge Range * Gauge Accuracy * Analog: ± 5% of MAX * Digital Gauge: ± 1% of Full Scale * Puritan-Bennett Quick Connect Vacuum Source Connection * Wide Range of Patient Connections

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Bottom Connection (inlet) - 1/8 inch NPTF * Gauge Range: 0-300mmHg - Full Vacuum * Gauge Accuracy:Analog: ± 5% of MaxDigital Gauge: ± 1% of Full ScaleAnalog Gauge: ± 5% of MAX within ref. indicator * Maximum Vacuum:REG. Mode @ Full Vac - 396 mmHg * Weight: 1.1 lbs. (.48 kg) * Dimensions: 3.7 in. (9.4 cm), 2.8 in. (7.1 cm), 5.2 in. (13.2 cm)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: Bottom Connection (inlet) - DISS Male Gauge Range: PM3000: 0-200mmHg - Ful Vacuum PM3000HV: 0-300mmHg - Full Vacuum PM3100: 0-200mmHg - Full Vacuum PM3100HV: 0-300mmHg - Full Vacuum PM3500: 0-150mmHG Gauge Accuracy: Analog: ± 5% of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator Modes: PM3100: LINE, OFF, REG PM3000 and PM3500: OFF, REG Maximum Vacuum: PM3000 & PM3100: REG. Mode @ Full Vac - 396 mmHg (53 kPa) PM3500D: Restricted to 170 mmHg (23 kPa) ± 10 mmHg (1.3 kPa) PM3500E: Restricted to 160 mmHg (21 kPa) ± 10 mmHg (1.3 kPa) Weight: 1.1 lbs. (.48 kg) Dimensions: 3.7 in. (9.4 cm), 2.8 in. (7.1 cm), 5.2 in. (13.2 cm) Battery: 3 Volt Lithium, ½ AA (Digital Vacuum Gauge Models ONLY)

It's InnovativeOnly unit with the dual capacity of subglottic and continuous suction. This allows clinicians to meet VAP prevention guidelines.It's UniqueFlow indicator enables the clinician. To rapidly assess the patency of the subglottic suction lumen.Its PowerfulOut performs traditional suction regulators at low suction pressures used for continuous subglottic suctioning.Its CompactFits into tight headwall systems.It's User FriendlyEasy to read dial and flow indicator.Subglottic Suction Regulator features include: * Scaled Suction Range: 0-85 mmHg (0-11.3 kPa) * Scale Accuracy: +/- 3 mmHg (.4 kPa) * Maximum Regulator Vacuum Setting: 85 mmHg (11.3 kPa) * Flow: 13 LPM @ 20 mmHg up to 37 lpm at Max of 85 mmHg (54 lpm in ”Push to Clear” mode) * Weight: 0.38lbs (0.17kg)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Bottom Connection (inlet) - Ohmeda Style Trap Bottle * Gauge Range: PM3300: 0-200mmHg - Full Vacuum PM3300HV: 0-300mmHg - Max Vacuum PM3400: 0-150mmHg * Gauge Accuracy: Analog: ± 5% of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * Modes: REG., OFF, INT. * Maximum Vacuum: PM3300: REG. Mode @ Full Vac - 396 mmHg (53 kPa) PM3400: Restricted to 170 mmHg (23 kPa) ± 10 mmHg (1.3 kPa) * Weight: 1.1 lbs. (.48 kg) * Dimensions: 3.7 in. (9.4 cm), 2.8 in. (7.1 cm), 5.2 in. (13.2 cm)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50% smaller than other suction regulators making it the product of choice for crowded wall and rail areas. With 0-760 mmHg the High Vac can give you more suction and flow with visible readings. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection.The large control knob and easy-to-read settings make vacuum adjustments simple, even in emergency situations.Specifications: * Gauge Range: 0-760mmHg - High Vacuum * Gauge Accuracy: Analog: ± 5% of MaxDigital Gauge: ± 1% of Full ScaleAnalog Gauge: ± 5% of MAX within ref. indicator * Modes: LINE, OFF, REG * Maximum Vacuum:REG. Mode @ Full Vac - 760 mmHg * Vacuum Ports: 1/8 NPT Female * Weight: 1.1 lbs * Dimensions: 3.7 in L x 2.8 in W x 5.2 in H

The PMX9001 Retrofit Adapter Kit allows every type of Precision Medical Vacuum Regulator to be outfitted with the PMX9000 Disposable Filter Vac Trap. Kit Includes: * Adapter Bracket * Washer * Fitting * One (1) PMX9000 Disposable Filter Vac Trap

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of eight (8) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Key Benefits: * Gauge Range: 0-150mmHg * Gauge Accuracy: Analog: ± 5% of Max Digital/Analog: Digital Display: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * Preset Range: ±10mmHg of setting * Modes: REG - OFF - INT (3l/min) * Weight: 1.2 lbs. (.56 kg) * Dimensions: 4.4 in. (11.2 cm), 2.8 in. (7.1 cm), 5.3 in. (13.4 cm)