Transport Ventilators & Circuits

The MRI-safe transport circuit is lightweight and made with components safe for use in the MRI suite. Corrugated tubing is expandable to 9 feet for easier ventilation management during procedures.

• Patient valve, PEEP valve and oxygen tubing constructed of MRI-safe materials
• 3 o’clock position of PEEP keeps valve out of patient’s face
• Circuit available with or without PEEP valve
• Latex free, single use

• Single Limb Circuit
• Pneupac ParaPAC Plus
• Vent
• Expiratory
• Port
• Flow Diverter
• No PEEP valve

• Tubing
• Mouthpiece

• Exhaust Collector
• PEEP valve
• Tubing
• Mouthpiece

• Smooth Inner Lumen Tubing
• Proximal Pressure Line
• Exhalation Port
• Proximal Pressure Line
• Hydrophobic Bacteria Filter
• Temperature Probe Adapter
• Right Angle Trach Elbow
• Water Trap
• Hose Clips
• Tube Hanger
• Humidifier Outlet Adapter
• Disposable

• Non-Invasive Circuit Accessory
• Disposable

• Single Limb
• Heater Wire Circuit
• Accessory Part

• Adult, 72 inch circuit
• Standard ventilator circuit
• Ported wye for pressure sensing and temperature monitoring, with tethered caps
• 22 mm blue polyethylene tubing

• Manufactured from the finest materials
• Durable
• High performance
• High quality
• PEEP Port

• Unique design
• Standard ISO 15/22 mm connections
• Translucent Construction
• Proprietary valves
• Low torque dial
• Lightweight
• Minimal Dead Space

Ventilation circuits designed for use with AutoVent™ ventilators.

Features:

• Single patient use

Manufacturer Brochure

• Valve Diaphragm
• Infant
• 10mm
• Disposable

• Passive swivel exhalation port
• Heated wire patient tube, 5 length, 22 mm diameter with 22 mm cuff, with heated wire connector
• Heated wire adapter
• Temperature probe port
• Humidifier connection tube, 2 length, 22 mm diameter with 22 mm cuff

Circuit includes inspiratory limb, expiratory limb, wye, high and low sense lines, exhalation valve without PEEP and exhalation drive line.

• Patient hose - 3/8 in ID x 48 in
• Adapters - 22 mm ID and 15 mm OD
• Holding Arm
• Test Cap
• Humidifier hose - 3/8 in ID x 24 in

• 6 inch patient tube
• 3/16 inch ID pressure line
• Polyisoprene diaphragm

• Two 6 foot flexible corrugated tubes
• Ported patient Y with port plugs
• Elbow connector
• Inspiratory connector
• Angled temp port with plug at distal limb
• Tube hanger