Suction Supplies

Key benefits: * Suction Tubing * 1/2in x 6ft

The SSCOR DuCanto Catheter® Suction Catheter is a single-use, non-sterile, rigid suction catheter specifically designed to be used by emergency care providers to aspirate liquids or semi-solids from a patient's upper airway. The SSCOR DuCanto Catheter® has a larger inside diameter than a standard Yankauer suction tip to facilitate the removal of fluids as well as solid material. The larger suction lumen makes it significantly less likely to clog in an emergency situation. The hyper curved catheter is shaped more like a patient's airway making it easy to position the catheter and work with other complementary devices used to clear a patient's airway. Features: * Non-sterile * Disposable * Shaft diameter: 0.26in ID x 0.55in OD * Shaft length: 9.3L

Key benefits: * Hydrophobic * Replacement Part for Easy Vac PM60

This suction instrument features a standard bulb tip designed to minimize patient trauma while creating maximum suction, as well as 6' of tubing. Features: * Available with or without the Control Vent * Sterile * Latex-free

Replacement Jar designed for VacTrap PM9000. *DOES NOT INCLUDE CANISTER*

Curaplex® Disposable Hi-Flow Suction Canister, 1200cc * Self-sealing lid provides leak-free seal * Lids contain multiple ports for versatility * Large, easy to read graduations * Disposable, single use * Latex, BPA, and DEHP free * Aerostat® filter with >99.99% bacterial efficiency

Neotech's patented NeoSucker Curved is a softer, anatomically curved alternative to the hard plastic devices on the market. The N208 extra large is perfect for older pediatric patients who are prone to biting down on the suction device. Just like the original Little Sucker, NeoSucker oral and nasal suction devices feature a flexible tip similar to a bulb syringe to help prevent mouth trauma. It is designed for single handed use with a thumb port for intermittent suctioning. NeoSucker Curved is an ideal bedside addition for patients at risk of seizure. Key benefits: * Anatomically curved shape * Designed for single handed suctioning * Thumb port for intermittent suctioning * Soft, flexible tip similar to a bulb syringe

Key benefits: * Easily attaches to most smooth surfaces * Low price and easy to use * Keep your suction device clean and close at hand * New write-on surface for patient information * Prevent tubing and devices from being misplaced or falling on the floor * Ideal for holding the Neotech Little Sucker and many other devices * Cap off suction and reduce noise * Not made with natural latex rubber * Not made with plasticizer DEHP

Hi-Flow™ Rigid Suction Canisters are designed to meet high volume collection and disposal needs. Canisters contain pour spout, vacuum and patient ports as well as a stepped patient port for direct tubing access. Canister features: * Self-sealing lid provides leak-free seal * Large, easy-to-read graduations * Lids contain multiple ports for versatility * Frosted panel provides writing area when needed * Nestable for storage * Disposable, single-use Aerostat® Hi-Flow bacterial filter features: * Effectively filters aerosolized microorganisms and particulate matter * Positive shut-off valve closes immediately when fluid reaches the top * Foam guard keeps float valve securely in place; prevents premature shutoff

Inline Hydrophobic Filter and Tube Assembly is a replacement part. It cannot be cleaned, If it becomes contaminated or clogged, it must be replaced as detailed in user manual.

Reusable polycarbonate bracket used to support the Guardian™ Canister in any slide mount such as the wall plate or mobile suction cart. Features: * Comes with on/ off valve built into bracket * Preattached tubing for connection to canister * Reusable * Use with 1200cc disposable canister Wall to outer edge of ring: 7.75in

Reusable polycarbonate canister/bracket assembly for use with disposable Flex Advantage® liner. Preattached bracket assembly with built-in on/off valve. Has preattached tubing for connection to disposable liner

Key benefits: * Filter/Elbow Assembly for PM60 and PM60E aspirators

Suction stylette is made of soft malleable copper.

The PMX901 Retrofit Adapter Kit allows every type of Precision Medical Vacuum Regulator to be outfitted with the PMX900 Disposable Filter Vac Trap.

Power Cord is a replacement part. Ground reliability can only be achieved when the power cord is connected to an equivalent receptacle marked "Hospital Grade".

Replacement collection canisters for DU-O-VAC PLUS are made of impact resistant plastic and have a built in hydrophobic filter that eliminates contamination and filters air.

Canister bracket is a replacement/accessory part designed for vacuum regulators.

Clear tips permit visual monitoring of suction fluids. Ribbed, universal connector fits securely on all types of tubing. Key benefits: * Optional vent * Ribbed, universal connector * Smooth and clean edges * No flash or parting lines * Clear blue-tinted plastic

Plastic ring for wall plate accommodates 1200 cc, 2000 cc, and 3000 cc canisters.

Suction Canister is a replacement part as detailed in user manual.

The HI-D® is a large bore suction tip with vented thumb control. The design enables efficient removal of fluids and particles and facilitates accurate and steady placement.

Key Benefits: * 6 feet in length

Battery Charger is a replacement part as detailed in user manual.