Pulse Ox Sensors & Probes

Making quick, informed decisions can be the difference in patient outcomes. The Philips Nasal Alar SpO2 Sensor is your “one and done” solution for fast, accurate and dependable SpO2 readings. This single-patient-use sensor maintains its placement on the nasal ala comfortably, without adhesives. The sensor is easily removed and reapplied, eliminating the waste associated with trying multiple sensors to get a good signal. Features & Benefits: * Earlier detection * More reliable monitoring of low perfusion * Dependable monitoring * Easy access to the alar site * Immune to ambient light * Less susceptible to high noise and vibration environments * Easy to clean device * No adhesive needed * For use with compatible pulse oximeters including Nelcor and Philips FAST compatible monitors

PureLight® Cloth 600C Pulse Oximeter Sensors are designed with an inclusive cable, sensor, and adhesive cloth wrap. Nonin’s 6000 Cloth Series provides the comfort for patients needing extended monitoring and secure placement. The disposable sensor features a stretch, tear-resistant cloth for easier placement and fit on the patient, especially for hard-to-fit patients such as infants and neonates. This ensures consistent readings by keeping the sensor in the proper position. These sensors feature trusted PureLight® technology, combined with Nonin’s PureSAT® signal processing, provide consistent results – patient to patient and sensor to sensor, even under challenging patient conditions such as motion and low perfusion. Features: * All-inclusive design with illustrated finger guide assures easy and accurate placement * Ideal where risk of cross contamination is high * Cloth material: Breathable for patient comfort * Stretch material: Easy placement and fit keeps sensor in proper position * Tear resistant: Increases the number of times the sensor can be repositioned * Preferred application: index, middle or ring fingers * Available in a variety of sizes: Adult to neonate * Latex-free

PureLight® Flex Pulse Oximeter Sensor Wrap features include:* Preferred application: lateral aspect of foot* Disposable

OxiMax™ sensor features include:* Adult size* 18-in cable

PureLight® Flex Pulse Oximeter Sensor features include:* Preferred application: lateral aspect of foot* 25 Disposable FlexiWrap® foot wraps* 1-m Cable

Reusable soft pulse oximeter Sensor designed for spot checking or continuous monitoring.

Disposable pulse oximeter finger sensor designed for pediatric patients. * Pediatric size for patients weighing in the range of 15-45 kg* Neonate size for patients weighing under 3 kg* Infant size for patients weighing in the range of 3-15 kg

PalmSAT® 2500 features include:* Simple – Easy, two-button operation* Battery Life – 2500: 80 hrs; 2500A: 60 hrs* Memory – 72 hours of data storage* Flexible – 4 AA batteries, rechargeable batteries or AC power with charger stand* Compact Size – 7.5-oz unit for easy handling

Featuring Nonin PureSAT® SpO2 technology, the WristOx2 3150 BLE delivers accurate readings in a wide range of patient populations and settings. It is ideal for multiple OEM applications where small, portable oximetry is needed—providing the versatility and reliability clinicians expect from Nonin. The WristOx2 3150 BLE features improved performance and reporting capabilities, including enhanced connectivity and increased memory storage. Advantages: Two Configurations * Single Unit—Includes sensor of choice and wristband * Starter Kit—Includes sensor of choice, three wristbands, carrying case, USB download cable, and nVision data management software Memory * 1,080 hours of non-volatile memory at a four-second sampling rate, high resolution variable sampling options of one or two seconds Device Registration Made Simple * The new BLE component has certification in US, Canada, EU, Japan, and Korea making device registration easier in key countries Controlled Measurement Data * New activation mode allows your technology to control when measurement data is taken; collector can determine when the 3150 is on or off Extended Range * Extended range of up to a 60 meter radius (Class I) Software Support * Advanced features such as 6 Minute Walk Test (6MWT) or overnight oximetry reporting available when used with nVISION® data management software

Flexi-Foam® III sensor is made of cushioned, conformable micro-foam material for maximum patient comfort and includes a 1 meter cable.

The Nonin CO-Pilot™ centralizes five noninvasive patient monitoring parameters into a single device that was designed to withstand the wear and tear of mobile care settings. Key Features: * Sensors connect to wireless signal processor which transmits patient readings to a handheld display, allowing for remote monitoring of up to 30 feet * Single sensor (8330AA) measures pulse oximetry (SpO2), pulse rate (PR), carboxyhemoglobin (COHb) and Methemoglobin (MetHb) * Pulse Oximetry (SpO2) – accurate and reliable pulse oximetry, even in difficult patient conditions such as hypoxia, CO poisoning, and motion * COHb – monitor patients for carbon monoxide poisoning or use for fire fighter rehabilitation even in the presence of hypoxia * Compliant to ISO 60601 EMS Standards including radio frequency immunity, water ingress of IP33, and drop tested at a height of 1 meter * Cerebral and Tissue Oximetry (rSO2) monitoring – Until now, it was not possible to measure cerebral oxygenation noninvasively with a simple handheld device. Use rSO2 monitoring to measure brain oxygenation during CPR or tissue oxygenation during ECMO. System Components: * (1) Display (D-HH) * (1) Wireless Signal Processor (SP-BLE) * (1) Carrying Case * (2) Chargers * (1) 8330AA Multi-Sensing Finger Clip Sensor * (1) Data Download Cable * (1) USB Flash Drive * (1) Quick Start Guide

The Nasal Alar FAST (Fourier Artifact Suppression Technology) SpO2 Sensor is designed for single patient use and measures arterial oxygen saturation at the ala, an ideal measurement site for difficult-to-measure patients. The sensor produces a strong, consistent signal, even in patients with poor perfusion. Built for comfort and durability, the non-adhesive sensor can be used for up to seven days. Features: * Reliable and comfortable * Use up to seven days * Designed for single patient use

Philips FAST (Fourier Artifact Suppression Technology) SpO2 Module A01

PureLight® 8600FO and 7500FO fiber optic series pulse oximeter sensors with 20 or 30 foot cable. For adult or pediatric use.

Reusable pulse oximeter finger sensor is used to noninvasively measure oxygen saturation and pulse rate.

Reusable Ear Oximetry Sensor used to measure oxygen saturation and pulse rate.

PureLight® Articulated Finger Clip Sensor features include:* Minimizes motion artifact* Comfortable, self-aligning grip* Durable & easy to clean* Preferred application: index, middle or ring fingers

PureLight® Ear Clip Sensor features include:* Adult* Patient Range over 88 lbs* 1 meter cable* Reusable

PureLight® Flex Pulse Oximeter Sensor features include:* 25 Disposable FlexiWrap® Adhesives* 3-m Cable

Small pulse oximeter ear clip probe is used with Nellcor SpO2. Optional 240 cm extension cable is available.

Reflectance® Ear Clip Sensor features include:* Adult* Patient Range over 66 lbs* Spot checking or continuous monitoring* Use with holders on forehead (617-8000H)* Reusable

Pulse Oximeter Sensor features include:* Finger* Adult* Over 45 kg* Disposable

Comfort Clip® Finger Sensor is for adults over 45 kg.

The 6500 Durafoam extended-life disposable series is an adhesive-free, single-patient use sensor line designed for extended wear compared to traditional disposable sensors. The ultra-soft foam provides maximum comfort for patients, while the unique shape ensures that the sensor remains in place. Product Highlights: * Unmatched value and less waste with an average use-life of 14 days per patient * Non-adhesive foam helps maintain skin integrity for patients * Easy to apply and re-apply for improved efficiency during patient care * Digit thickness: 5 mm - 21 mm (0.19 in - 0.82 in) * Patient range: > 30 kg (66 lbs) * Preferred application: Index finger * Includes 1 meter cable