Ventilation Tubing & Accessories

Channel clamp designed for wall mount.

VentiMyst® Advanced Active Humidification delivers absolute humidity and manages excess rain-out. Adult breathing circuits (1.6m) with single or dual heated wires. Effective Moisture Management The VentiMyst® technology reduces the build up of rain-out. Clinical Confidence Reduced need to open or break the circuit with associated loss of PEEP and de-recruitment of the lungs. Sterile Packed All VentiMyst Heated Wire Breathing Systems are supplied sterile for superior patient safety. Efficient Temperature Transfer Helps prevent gas temperature loss and surface cold spots, minimizing rain-out. Low Compliance Tubing Accurate delivery of gas volumes and ventilation pressures to the patient. Reduced Risk Reduced risk of accidental drainage of rain-out into the patient’s airway.

Dual heated wire humidifier adapter lead for the FL-9000U Respiratory Humidifier.

Channel clamp includes standard female channel and clamp.

Smooth interior tubing is disposable and can be stretched by 10%.

Accutach™ Pneumotach Flow Sensor The Accutach sensor is a latex free, hypo-allergenic, flow sensing device. When placed in the line of the ventilator circuit the sensor accurately measures flow, volume, and pressures delivered to the patient. This disposable device provides differential pressure signals through the sensor ranges, precisely measuring ventilator settings and assuring the integrity of the patient circuit. The Accutach operates at the distal end of the ventilator circuit, locate between the patient Y and the endotracheal tube. The small dead space of 11 cc and the Accutach’s light weight provide ideal patient monitoring. The Accutach comes as a complete package with a Flow Sensor, a pair of 72-inch color-coded ventilator panel lines, a 15 mm ID – 22 mm OD adapter, and a 22 mm tubing clip. Each device is packaged clean and must be calibrated prior to use. The Accutach was designed to work with the H7200 VR-1 monitor and the Galileo®, Amadeus&

KC-5 Series Adult Clear Cuffless Ventilator Tubing is a transparent, non-conductive ventilator tubing with a kink-resistant design. It features a smooth internal diameter. The ventilator tubing has an inner diameter of 15mm and available in 18in lengths. * Single Patient Use * 22mm I.D. * Non-conductive * Smooth internal diameter * Kink resistant * Transparent * Not manufactured with Natural Rubber Latex * Packaged: Individual

Water trap assembly features include:* Miniature Size* 5 Micron Filter* Manual Drain Valve* High Flow Capacity

VENTI-COMP® is a disposable, accurate system for computing tidal volume and a minute volume.Features:* Versatile adaptor allows unit to be connected to most expiratory ports* Accurately and reliably measures and / or evaluates the effectiveness of an I.P.P.B. treatment* Designed to be simple and easy to use-requires no special technical knowledge or training* Precise and accurate readings from the easy - to - read chart printed directly on the VENTI-COMP bag* Single-patient use of VENTI-COMP eliminates possibility of cross - contamination

Expiratory Side Filter, for Circulaire

Disposable exhalation valve includes holding arm, open stem and plug.

Elbow Adaptor, 22mm ID x 22mm OD

Lifecare Mouthpiece features include:* Angled* 15 mm* CE* Accessory Part

Inline aerosol tee adapter for use with the Combivent® Respimat® inhaler. * Port Sizes: Inlet: 22mm O.D. Outlet: 22mm I.D. * Size: Length: 3 in Height: 2.4 in Body Width: 1 in Wye Angle: 45° Cap Width: 1.3 in (at widest point) * Materials: Body: Polystyrene-Butadiene Cap: Theromplastic Rubber * Color: Body: Clear Cap: Clear * Use: Single Patient Reuse (Can be used to deliver medication multiple times to a single patient while installed in a breathing circuit.)

Hytrel smooth interior tubing with end fitting is autoclavable and reusable.

Re/X800™ collector vial is a reusable replacement part.

Single heated wire humidifier adapter lead for the FL-9000U Respiratory Humidifier.

High flow pressure relief valves with monitoring port.

Corrugated Tubing, CORR-A-FLEX II, 100ft Roll, Cuttable Section Every 6 Inches, Blue

Flexible Teflon Connector (transparent/white) designed with 15 mm Male by 15 mm Female ends. Ends are firmly threaded into the convolutions of the tubing making it easy to assemble connections of different lengths. Connector is inert, long-lasting, lightweight, flexible, translucent, and heat sterilizable.

Features: * Exhalation valve with 22mm plug and drip cap. * End to the left is plugged. * End to the right is 22mm OD. * Diaphragm cap fits 1/8" ID tube. * Drip cap swivels 360° and is 22mm OD.

Spiriolog® is compatible with Dräger devices: Primus, Fabius GS, Julian, Cato, Cicero, Sulla, Evita family, Savina.

Disposable, lightweight tubing featuring a corrugated exterior with a smooth interior. Features: * No internal corrugates for condensate to collect in* Smooth interior offers quiet passage of airflow even at high flow rates* 22-mm inside diameter adapts to most respiratory therapy applications* Individually packaged

KC-P Series Pediatric Cuffed Ventilator Tubing is a transparent, non-conductive ventilator tubing with a kink-resistant corrugated spiral design. It features a smooth internal diameter which promotes laminar gas flow and resists the trapping of water. The ventilator tubing has a silicone rubber cuff with an inner diameter of 15mm and available in 18in, 24in, and 60in lengths. Features: * Reusable tubing * 15mm Inner Diameter * Non-conductive * Smooth internal diameter * Kink resistant * Transparent * Not manufactured with Natural Rubber Latex * Materials * Polyester Elastomer * Silicone Rubber Cuffs * Individually Packaged