Teleflex

A novel approach to ventilation management, the Gibeck® Humid-Flo® HME promotes best practices for VAP risk reduction. Designed to remain in-line for 72 hours even when aerosol treatments are given. Two operating modes, HME and AEROSOL, are enabled by rotating the blue collar. Select HME, and the Gibeck Humid-Flo will operate as a traditional Heat & Moisture Exchanger. Select AEROSOL, and the HME element is bypassed and a center passageway is exposed, allowing the delivery of aerosolized medication.Benefits: * Advances patient safety by reducing the frequency of ventilator circuit breaks. * Maximizes clinical outcomes by eliminating the need to interrupt ventilation, allowing PEEP to be maintained. * Reduces potential of caregiver exposure to depressurizing circuits by reducing the frequency of ventilator circuit breaks.

These bacterial / viral filters utilize a nonconductive, naturally hydrophobic filter media that offers excellent filtration with low resistance to gas flow.Features: * 22mm ID x 15mm ID/22mm OD connections * Bacterial filtration efficiency: 99.999+% * Viral filtration efficiency: 99.99+% * Dead space: 42ml * Flow resistance: approximately 1.5 cmH2O at 60 LPM

The MICRO MIST small volume nebulizer is designed for performance and economy. It can be used for hand-held or in-line treatments. Due to its inventive capillary design it can deliver a consistent fine, dense mist at any angle up to 90°, thus patients can be treated from upright to supine positions. Optimal particle size (2.7 micron MMAD), efficient nebulization rates and minimal residuals result in effective pulmonary deposition. An easy-seal threaded cap and a 6 ml capacity anti-spill jar prevent leakage and ensure easy assembly/disassembly. A minimum of components and a clearly marked jar enable quick preparation and start-up. MICRO MIST is available separately or with a wide variety of components, according to customer needs. Graduated cc markings allow for easy observation and control of medication usage.

Sheridan SHER-I-SLIP® intubating stylet is designed to retain the desired curve during oral intubation. Features: * Special blue-colored material reduces stylet-to-tube friction * Smooth molded distal tip end * Sterile and latex free

Rusch endobronchial tubes are designed to fit your patient’s anatomy; making both left and right designs easy to use. High volume/low pressure tracheal cuff has a true barrel shape that minimizes pressure on the tracheal tissue and a uniquely shaped bronchial cuff helps prevent accidental upper lobe occlusion. Features: * Hi volume/low pressure cuff * Uniquely shaped bronchial cuff * Double swivel connections with double caps * X-ray opaque markings * Latex-free * Robertshaw tube * Lumen ID 3.4 mm

The TRACH-VENT® HME is designed specifically for trachestomized or intubated, spontaneously breathing patients.Features: * >50 ml VT range * 27 mgH2O/L, VT = 0.5L moisture output * 0.25 cmH2O, 30lpm resistance * 10 ml dead space

The Rusch Slick® stylet is made of malleable coated wire that holds its shape to facilitate intubation. The specially formulated nylon coating does not crack or peel while allowing for smooth tube insertion. The stylet is fitted with a stopper that helps maintain the desired stylet position within the endotracheal tube. Features: * Color coded blue * Handle forming capability for a better grip * Sterile, single use device * Malleable coated wire * Latex-free

Bite Gard® is a disposable, compressible molar bite block provides a cost-effective solution for patients who clench their teeth. Prevents damage to laryngeal mask airways (LMA), bronchoscopes and other valuable medical equipment.

These airways are designed with three separate channels. The internal configuration establishes, at point of entry, the prescribed path of a suction catheter. This eliminates possible blocking of the airway, assuring that two channels will remain open for gas exchange. Each airway is contoured for maximum comfort and is made of soft, pliable, clear vinyl. Available in different sizes. Features: * Available in multiple sizes * Made of flexible vinyl * With rigid bite block * Guedel style airway * 3 internal channels

The Humid-Vent 2 is designed in both angled and straight versions for use in intensive care and anesthesia applications. * Recommended for tidal volumes between 150 mL and 1500 mL * Transparent housing provides excellent visibility * Very low resistance to flow * Humid-Vent 2S Flex configurations include permanently attached 15-mm ID Smooth-Flo® tube with rigid patient connector * Item Code 17731 is provided sterile for head and neck surgery

The Ovassapian Fiberoptic Airway is designed primarily for use with a fiberoptic endoscope.Features: * Ideal design allows for removal without disconnecting or diplacing positioned endotracheal tube * Flat lingual surface widens gradually at distal end * Flexible curved guides between vertical side walls at the buccal end permit removal of the airway from around a tracheal tube * Tubular proximal half functions as a bite block * Distal half is open posteriorly to provide fiberscope maneuverability * Fits Tube sizes 8.0mm - 9.0mm ID

The Rusch QuickTrach® allows quick and safe access for ventilation in the presence of acute respiratory distress with upper airway obstruction. The kit consists of a preassembled emergency cricothyrotomy unit with a 10-milliliter syringe, padded neck strap and a flexible connecting tube.Features: * Removable safety stopper reduces risk of damage to the rear wall of the trachea * Conical needle tip guarantees the smallest necessary stoma and reduces bleeding * The syringe allows identification of tracheal entry by aspirating air * Flexible connecting tube for immediate ventilation * Size: 4.0 mm

Rusch endotracheal tubes are made from thermo sensitive Ruschelit® PVC with clear depth markings and a black positioning ring. All tubes also have atraumatic hooded tips and smooth edges. Features: * AGT preformed nasal or oral * Cuffed * Murphy eye * X-ray opaque

Convenient, single use Color-Coded Guedel airways are made of plastic and are latex free.Features: * Individually wrapped * Smooth finish and rounded edges * Reinforced bite block helps prevent occlusion * Single use * Full range of sizes available

Sheridan CF® Endotracheal Tubes have a close fitting, low pressure cuff for short-term surgical intubation. Features: * Close fitting design eases intubation * Opaque cuff color increases visualization * Murphy eye * Sterile

Rusch Endotracheal tubes are made from thermo sensitive Ruschelit® PVC with clear graduated depth markings and a black positioning ring. All tubes also have atraumatic hooded tips and smooth edges. Features: * Safety Clear™ cuffed * Nasoral * Murphy * X-ray opaque

The Humid-Vent 1 is the original, disposable, in-line HME. * Recommended for tidal volumes between 50 mL and 600 mL * Offers low resistance to flow * Available in 2 configurations, with and without CO2 port

HUMID-VENT® HMEs are characterized by optimal moisture output coupled with low resistance to flow, low dead-space and light weight.Features: * For neonates and infants * 15ml to 50ml tidal volumes * Provides over 30 mgH2O/L @ Vt 20mL * 0.6, 5 LPM; 0.9, 10 LPM resistance (cm H20) * 15mm male x 15mm f / 22mm connection * latex-, phthalate-, and PVC-free * Sterile

The hydrophobic HEPA filter uses the bidirectional bacterial/viral filtration media which provides high-level filtration protection while conserving patient exhaled heat and humidity.Features: * Smooth, lightweight, transparent, low-dead-space housing design for maximum patient and staff comfort * For use with adult and pediatric patients in anesthesia applications * Bacterial/Viral filtration efficiency: 99.9999+% * True hydrophobic HEPA filter, HEPA Class 13 * 150 ml to 800 ml tidal volume * 2.3 cm H2O resistance * 29 ml dead space * Individually packaged

Features: * AGT preformed oral * Cuffed * Murphy eye * X-ray opaque

This nasal airway features interior striations for smooth suction catheter insertion. Made of a soft PVC, these nasal airways are latex-free with a fixed flange and bevel tip. Features: * Striated interior for easy suctioning * Made of soft plastic * Latex-free * Sterile * With soft PVC and bevel tip * Disposable, Single Use * Available in different sizes

Mask harnesses are designed for maximum flexibility and patient comfort.

Pencil Point Spinal Needles have a smooth contour pencil point tip. Polished surface to extemely low surface roughness. The cut edges of the opening are rounded and likewise polished. CSF flow is optimized by a special polishing and cleaning process on the inside of the fine needle tube. Smooth highly polished pencil point tip. Designed to separate, not cut, dural fibers to reduce risk of post dural puncture headache. Smooth lateral eye. Color coded for Gauge size.

Features: * Advanced, highly hydrophobic bacterial/viral filter - HEPA Class 13 * Suitable for use as an HME * For use on pediatric to adult patients * Bacterial/viral filtration efficiency: 99.9999+%Specifications: * 300-1200 ml VT range * 25.7 mgH20, VT=.5L moisture output * 1.6 cmH20 resistance * 22mm ID x 22mm OD/ 15mm ID connectors--ideal for machine filtration applications