Capnography / EtCO2 Monitoring

Nasal Sampling Cannula features include: * Sal * CO2 * Pediatric * 7ft Sample Line * Male Luer Lock Connector * Disposable

Pediatric Airway Adapter designed for 8200, 8400, 8401, 9004 and 9200.

Connector, Tee, Straight, w/CO2 Sampling Line, Sense TC, Single use, Disposable.

Moisture trap with filter for LifeSense® and RespSense™ capnograph. Features: * Disposable * For Use With: LifeSense® and RespSense™ Capnograph * With: Filter * Flow-thru design, the moisture water trap eliminates air mixing which gives accurate EtCO2 monitoring * High capacity moisture trap that allows uninterrupted patient monitoring

Nasal Sampling Cannula features include: * Sal * CO2 * Adult * 7ft Sample Line * Male Luer Lock Connector * Disposable

Lithium-Ion Rechargeable Battery for the Capnocheck® II Carbon Dioxide Detector.

Pole Mount Bracket designed for the Capnocheck® II Carbon Dioxide Detector. Features: * For Use With: Capnocheck II

SENS Valve is a gas regulator. Features: * For Use With: LifeSense®, RespSense®

Adjustable 2inch Mounting Clamp for Sens PMC (requires Monitor Mounting Bracket, Sens Mount-3 hole, 7775-001) Features: * Dimensions: 2in * For Use With: Mounting Bracket, 3 Hole, for LifeSense® * Adjustable

Three hole mounting bracket for LifeSense® monitor. Features: * For Use With: Mounting Clamp, Adjustable, 2in, for LifeSense®

Protective rubber bumper for LifeSense®, RespSense® and PulseSense® monitors. Features: * Color: Blue * Material: Rubber * For Use With: LifeSense®, RespSense®, PulseSense®

Calibration Sensor is a replacement part. Features: * For Use With: LifeSense®, RespSense®

Nafion premapure tubing, 12 inches long, for the RespSense series. Features: * Dimensions: 12in * For Use With: RespSense®

Gas sampling tee with cap is disposable.

Divided Cannula features include: * Design incorporates a permanent barrier in the facepiece and a dual tubing set * Unique, innovative configuration, no modification required; integrity of the procedure is certain * Curved, tapered nasal prongs. Facepiece anatomically curved to fit upper lip * 22mm ID x 6mm OD anesthesia circuit oxygen adapter * Soft, lightweight clear material * Luer Lok® Connector * 7ft lines

Gas Sampling Monitoring Adaptor, 15mm OD x 15mm ID/22mm OD, Capped Luer Fitting. Features: * Color: Clear, Blue * Contains Latex * Standard luer fitting

Pediatric/Infant Nasal ETCO2 Sampling Cannula. Features: * End tidal sampling from both nares * Curved, tapered nasal prongs * Soft, lightweight, clear material * Anatomically curved to fit upper lip * Luer Slip®

CapnoCare is a CO2 sampling device for use during critical situations when monitoring of EtCO2 is required. CapnoCare can be used with a resuscitator bag for intubated patients or with anesthesia masks. Features: * Universal Connections: The 22/15mm connectors can be used with ET tubes or anesthesia masks * Fixed Line: The pre-assembled fixed line saves time and reduces the risk of misassembly and delays in critical clinical situations * Bacterial Hydrophobic Filter: Protects the monitor from condensation and cross-contamination risks * Improved Accessibility: 10ft line enables clinicians to easily connect the patient to the monitor, even from a distance

The EtCO2/O2 Capnography Cannula features divided capnography cannulas to provide true EtCO2 sampling with proven O2 delivery. With the divided design, the gases are separated and the O2 is able to be delivered without limitations at higher O2 rates. Salter Eyes maintain sampling even during a cannula occlusion. Features: * Divided capnography cannulas provide EtCO2 sampling and O2 delivery with no limitations * Divided design separates gases * Both EtCO2 and O2 tubes are 7ft long * EtCO2 features a Male Luer Lock * 7-foot O2 line

CapnoVue® CO2 Masks with Scope Access separates O2 and CO2 flows for procedures where higher FiO2 is wanted. These masks allow for effective sampling for mouth breathers and upper GI cases while providing patients a higher oxygen delivery where more aggressive oxygenation is needed. The Luer ports located at both expiratory ports separate CO2 from O2 for clean end tidal signals. Features: * Higher oxygen delivery for patients where more aggressive oxygenation is needed * Expiratory ports separate CO2 from O2 for clean end tidal signals * Designed with scope access for upper GI procedures * Available for adult patients with 7-14ft tubing

Oral/Nasal ETCO2 Divided Sampling Cannula features include: * Oral/Nasal End Tidal CO2 sampling * Design incorporates a permanent barrier in the facepiece and a dual tubing set * Oral sampling TRUNK is adjustable to fit individual patient facial contours * Malleable, semi-rigid wire is encased in the body of the Oral-Trac® TRUNK * Malleable, semi-rigid wire is non-ferrous * Dual port Salter Eyes® in nasal prongs * Facepiece anatomically curved to fit upper lip * Luer Lok® Connector * Anesthesia Circuit Adapter * 7-foot O2 Line

Divided Cannula features include: * Design incorporates a permanent barrier in the facepiece and a dual tubing set * Unique, innovative configuration, no modification required; integrity of the procedure is certain * Curved, tapered nasal prongs. Facepiece anatomically curved to fit upper lip * 22 mm ID x 6 mm OD anesthesia circuit oxygen adapter * Soft, lightweight clear material * Luer Lok® Connector * 7-foot O2 line

Oral/Nasal ETCO2 Divided Sampling Cannula features include: * Oral/Nasal End Tidal CO2 sampling * Design incorporates a permanent barrier in the facepiece and a dual tubing set * Oral sampling TRUNK is adjustable to fit individual patient facial contours * Malleable, semi-rigid wire is encased in the body of the Oral-Trac® TRUNK * Malleable, semi-rigid wire is non-ferrous * Dual port Salter Eyes® in nasal prongs * Facepiece anatomically curved to fit upper lip * Male Luer Lok® Connector * Anesthesia Circuit Adapter * 7-foot Lines

VentFLO™ ETCO2/O2 sampling cannulas deliver oxygen while capturing an end tidal gas sample, even with simultaneous insufflation of oxygen. These EtCO2/O2 cannulas also feature a bright orange reflective style connector, compatible with Microstream™, Capnostream™ and Oridion™ capnography monitors. Features: * Hygroscopic filter inside reflective connector to help minimize moisture * Simultaneously delivers oxygen while obtaining CO2 sampling during spontaneous breathing * Compatible with Microstream™, Capnostream™ and Oridion™ capnography monitors * Soft-Ears™ material helps ensure superior patient comfort * Designed to prevent mixing of fresh oxygen with CO2 * 3-Channel tubing prevents kinking * Available in three tubing lengths, each with Fits-All O2 connector