Precision Medical

The low flow chrome flowmeter features polycarbonate housings that are impervious to chemical solutions normally used in a clinical setting and polycarbonate flow tubes that insure durability. Precision Medical Flowmeters use black glass flow indicator balls making the setting easy to read. Their exceptional sphericity and uniform weight contribute to a more accurate flowmeter than using than those using plastic floats. The flow control knob is on the front of the flowmeter in clear site of the operator unlike side mount knobs which are susceptible to damage during installation of additional equipment. The housing and flowtubes carry a lifetime warranty and the needle valves carry a five (5) year warranty. Specifications: * Scale: 0-200cc * Increments: 20cc (starts at 20cc) * Accuracy: ±10cc from 0-100cc ±14cc from 100-200c * Flush Flow: 500cc

Pole Clamp features include:* 1/8 NPT Female Holes - Top and Bottom* 1 Plug on Bottom* Hand Tight Knob* Maximum Pressure - 200 PSI

Durable The polycarbonate housings are extremely durable. They are impervious to chemical solutions normally used in a clinical setting preventing clouding and spidering. The polycarbonate flow tubes ensure durability. Accurate Our flowmeters use black glass flow indicator balls. Their exceptional sphericity and uniform weight contribute to a more accurate flowmeter than those using plastic floats. Precise Highly accurate needle valves ensure precise flow-settings the first time...every time. Easy to Use The flow control knob is on the front of the flowmeter in clear sight of the operator unlike side mount knobs which are susceptible to damage during installation of additional equipment. Our black glass float makes the flow setting easy to read. Dependable The housings and flow tubes carry a lifetime warranty and the needle valves carry a five-year warranty. Specifications: * Scale: 0-70 LPM * Increments: 5 LPM (starts at 10 LPM) * Accuracy: ±3 LPM * Flush Flow: 70-90 LPM

Its Powerful. We've put power and higher flow into a small package. Our high performance 1/5 horsepower pump delivers a suction range of 0-200 mmHg and a full vacuum of 279 mmHg. Its Lightweight and Compact. An average of 42% lighter and 44.8% smaller than comparable units, it fits into areas where space is at a minimum and is easy to carry. Its Convenient. The unique canister holder is moveable, allowing the caregiver to rotate the canister to either side of the unit for best placement near the point of use. Its Durable. The plastic cabinet is durable, attractive, easy-to-clean and infection control friendly. Its Protected. A dual protection system consists of a float shut-off in the canister lid and an Inline Hydrophobic Filter to prevent back flow of fluid as well as airborne contaminants from entering the pump. Its Quieter. Our unique design allows a quieter operation for around the clock use. Its Field Serviceable and Dependable. The PowerVac+ Intermittent Aspirator has a unique patented modular design regulator. No need to replace the full unit, only the problem module.

Neb treatments, resuscitation bags or equipment power are all available with this unique product. All equipment can be kept connected and ready for use when needed. You simply need to push the switch from OFF to ON to deliver a neb treatment or to utilize a resuscitation bag.

Primary outlet assembly for the PM5300 air blender.

Diverter is an accessory part.

O-Ring, for Select Flowmeters

Handle for PM50/PM60 EasyVac Compressor series

Replacement float assembly for the PM9000 Vac Trap.

Connector, Trap, Vacuum, Ohmeda, Locking Gland, 1/8in NPT Male

Horizontal pole mount for Precision oxygen monitors and blenders.

Carrying Bag features include:* Polyester* Foam Backing* Accessory Pocket* Adjustable Strap

N2O Quick Connect Adapter features include:* Chemetron x 1/4 Hose Barb* Maximum Pressure - 200 PSI* All Pipe Fittings are National Pipe Threads

O2 Quick Connect Coupler has a maximum pressure rating of 200 PSI.

90° Elbow Adapter designed for oxygen fitting.

EasyPulse5 Oxygen Conserving Regulator features include:* Oxygen Cylinder Connection: CGA 870 Post Valve* Pulse Settings: 1, 2, 3, 4 and 5* Flow Settings: 2 lap Continuous* Cannula Requirements: Maximum 7 ft long adult standard single lumen oxygen nasal cannula* Inlet Pressure Range: 300-3000 psig* Internal Regulated Pressure: 50 psig* 4.75L x 2.63W x 2.50H-inches* 10.4 oz

Hose designed for nitrogen, N2, delivery.

Filter Assembly is a replacement part as detailed in user manual.

Pole mount assembly designed for oxygen/air blender (PM5200 and PM5300).

Flowmeter housing is a replacement part.

Flowtube features include:* Polycarbonate* Replacement

Body Connection features include:* Knob* Adapter* Replacement Part