Maxtec

Try the Maxtec MaxO2 ME+p Oxygen & Pressure Monitor Simulator! MaxO2 ME+p Oxygen & Pressure Monitor allows caregivers to continuously monitor oxygen and pressure during the bubble CPAP therapy. This device can easily be integrated into a blender delivery system. Alarm fatigue is alleviated with customizable high and low alarms. These are to alert changes in pressure that could impact the safety and effectiveness patient care. Patient care and comfort is maintained with the use of the backlight setting and alarm silence function. Benefits: * Maintain Patient Comfort: Features a backlight function for low light environments and alarm silence settings * Streamline Oxygen Delivery Setups: Complete the respiratory care setup with an easily integrated bCPAP system, blender, and flow meter * Improve Patient Care: Patient response to changes in flow rates, oxygen levels, and pressure is easily monitored to help for better patient care * Ensure Accuracy: Variances in pressure readings are reduced by relying on the clear pressure monitor display instead of CPAP probe position Includes: * MaxO2 ME+p Oxygen & Pressure Monitor * Coiled Oxygen Sensor Monitor Cable * Max-550E Oxygen Sensor * Flow Diverter * Blue Tee Adapter

Cable, Sensor, Coiled

The MaxVenturi® has been specially designed to interface with high flow humidification systems. Using the well established venturi principle, this unit provides users with the ability to mix ambient air and oxygen without the need for piped medical grade air. This is the perfect solution for adult high flow therapy in almost any environment. Features and Benefits: * Provides users with the ability to mix ambient air and oxygen without the need for piped medical air * 10-55 LPM * All-in-one oxygen/air mixer, MaxO2+ analyzer and flow meter * Long battery life on analyzer (approximately 5,000 hours) * Independent adjustable O2% and flow * Built-in pole clamp * Ease in titration * Two year O2 sensor warranty * Easy to clean (Wipe down the unit between uses)

Flow Inspection Tool

Oxygen sensor used as a replacement for Hillrom (Airshields) [Isolette Incubator].

Adapter, Barbed, Threaded, with Tubing

MaxO2 ME+p Pressure Monitoring Line with Moisture Trap is designed to be used with the MaxO2 ME+p Oxygen & Pressure Monitor. The moisture-controlling pressure monitoring line connects to bCPAP system. Unique Nafion™ Tubing Technology controls moisture in line. Features: * Use with the MaxO2 ME+p Oxygen & Pressure Monitor * Nafion™ Tubing Technology

Oxygen Sensor used as a replacement for MSA MiniOX I, II, III, 3000, and PB O2 Monitor.Replacement for: * Airshields [See Hillrom] * Analytical Industries [PSR-11-917-J] * Bio-Med Devices [10006 Sensor, M-10, M-2 Monitors, Sensor #4433, Monochrome Crossvent (use Max-13c)] * City Technologies [MOX-2] * Covidien (Puritan-Bennett) [4-020933-00, 7820 Monitor, 7200 Vent] * Datascope [Anestar S] * EnviteC [OOM-102-1] * Hillrom (Airshields) [6735142] * Hudson RCI [See Teleflex Medical] * Invivo [9445 Sensor] * Mindray [A5 Anesthesia Machine] * Mercury Medical [10-103-05] * MSA [406931, MiniOX I, II, III, 3000] * Pacifitech [PT-11A] * Phillips (Respironics) [Criterion Vent, Espirit Vent Lifecare (#PLV-102), 37-079 Sensor] * Precision Medical [PM5900, #504877] * Puritan-Bennett [See Covidien] * Teledyne [R17MED, #C-43690 (see Max-7 for AX/MX300 replacement] * Teleflex Medical [5567, V-11] * Viasys [66030 Sensor, 6400 Vent, 8400 Vent, VIP Vent] * VTI [100580]

Self-coiling, single coil oxygen hose featuring the following: * Easy to move with equipment * High-grade polyurethane material to help keep the work space clean * DISS Fittings (handtight and hextight) * Self coiling prevents touching the ground * Meets NFPA 99 Standard for manufactured assemblies * 15 feet

Basket for SmarStack IV pole. The baskets are available to fit any IV pole with a 1 or 1.75 inch diameter and includes a robust, solid aluminum mounting bracket that securely attaches the basket to the pole. The basket is protected by a durable, powder-coated finish and a 24 month warranty. Features: * Solid aluminum mounting bracket * Durable, powder-coated finish * Sizes: 1in and 1.75in

Provides a durable, accurate and dependable solution to delivering precise amounts of flow. * Durable, polycarbonate housing * Highly accurate needle valve * Standard DISS outlet * Lifetime warranty on housing & flow tube; 5-year warranty on needle valves

Blender hoses, Dual Air & Oxygen Coiled,Chemetron Quick Connect, 10ft

EyeMax2 was designed based on valuable feedback from customers. Improved design to assures optimum comfort and protection for patients during phototherapy treatment. * Easy-to-use design * Adjustable band for a perfect fits * Bigger eye pad for less pressure and better UV protection

Maxtec® new flow meter manifold allows for fast and easy attachment of a flow meter to an IV pole. Every flow meter features a durable housing, a highly accurate needle valve and is covered by a 5 year warranty. * Quickly mount flowmeter with ease * Durable, acrylic housing * Highly accurate needle valve * Lifetime warranty on housing & flow tube; 5-year warranty on needle valves * 0-15LPM / 0-70LPM w/DISS Fitting

Tank holders designed for SmartStack IV Stands. Available for single or dual holders. Features: * Single tank holder (# 203-R105P04) * Dual tank holder (# 203-R105P04-001)

Bracket flush surface mount.

The 2-in-1 Muffled and Non-Muffled Adapters are designed specifically for use with multiple sizes of commonly used medical tubing. It provides users the option to connect 22mm (large bore) or 15mm (small bore) tubing to any device with a male DISS fitting—such as common flow meters. It is specially designed for High Flow applications and dampens noise to minimize patient stimulation during use. Features: * Dampens noise to minimize patient stimulation during use * Connects large bore (22mm) or small bore (15mm) tubing to any DISS fitting * Specially designed for high flow applications

Mounting bracket for the MaxO2 ME+p Oxygen & Pressure Monitor (item 203-R230P06). Features: * For Use With: MaxO2 ME+p Oxygen & Pressure Monitor

Oxygen Sensor includes O-Ring. Generally place in-line with pressure and flow to provide a good seal to prevent leakage.

Oxygen sensor used as a replacement for Covidien/PB* Ventilators.Replacement for: * Covidien (Puritan-Bennett) [4-072214-00, 840, 740, 760 & PB2000 Tester Vents]

The 3-in-1 Adapter was designed to be compatible with several sizes of common medical tubing. Users have the ability to connect 22mm (large bore), 15mm (small bore), or ¼” cannula tubing to any device or outlet with a male DISS fitting. Features: * Up to three connections in a single, reusable connector * Connects large bore (22mm), small bore (15mm), and ¼” cannula to any DISS fitting * Specially designed for low flow applications * Durable, made from machined aluminum

The MaxBlend Lite is designed to provide all of the features of our MaxBlend 2 to customers already using a stand-alone blender. When paired with an existing blender, the MaxBlend Lite provides it’s users with the added features of a built-in O2 monitor with high and low alarms, and a flow meter. This product securely attaches to your blender using a specific independent adapter block. * Combine to create a three-in-one blender * Large, backlit LCD * 15% to 99% low alarm capabilities * Multiple flow meter configurations * DC power port for optional, remote power supply * Smart alarms – set alarms 3% +/- current reading * Bleed control * Available in Low & High Flow

Oxygen Sensor used as an extra-life replacement for MSA MiniOX I, II, III, 3000, PB O2 Monitor and as noted below.Replacement for: * Airshields [See Hillrom] * Analytical Industries [PSR-11-917-J] * Bio-Med Devices [10006 Sensor, M-10, M-2 Monitors, Sensor #4433, Monochrome Crossvent (use Max-13c)] * Covidien (Puritan-Bennett) [4-020933-00, 7820 Monitor, 7200 Vent] * Datascope [Anestar S] * Hillrom (Airshields) [6735142] * Hudson RCI [See Teleflex Medical] * Invivo [9445 Sensor] * Mercury Medical [10-103-05] * MSA [406931, MiniOX I, II, III, 3000] * Pacifitech [PT-11A] * Phillips (Respironics) [Criterion Vent, Espirit Vent Lifecare (#PLV-102), 37-079 Sensor] * Puritan-Bennett [see Covidien] * Teledyne [R17, #C-43690] * Teleflex Medical [5567] * Viasys [66030 Sensor, 6400 Vent, 8400 Vent, VIP Vent] * VTI [100580]

Maxtec's acrylic flowmeters provide a durable and accurate solution to delivering precise flow amounts. The flowmeter features a durable acrylic block housing and a highly accurate needle valve. This flowmeter has a DISS fitting with a flow range of 0-70LPM. Features: * Durable, acrylic housing * Accurate needle valve * Standard DISS outlet * 0-70LPM flow range