Precision Medical

Flow Selector features include: * DISS Female Hand Tight Inlet * 2 Tubing Barb Outlets * 1 DISS Male Connection Outlet

Preset your desired suction level. When activated, the preset level and gauge reading can be used to check for system leaks. The case is made of ABS plastic and houses the gauge for extra protection. Specifications: * Gauge Accuracy: Analog: ± 5 % of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. Indicator * Vacuum Ports: 1/8 NPT Female * Modes: LINE - OFF - REG * Maximum Vacuum: PM3300: REG. Mode @ Full Vac - 396 mmHg (53 kPa) PM3400: Restricted to 170 mmHg (23 kPa) ± 10 mmHg (1.3 kPa) * Weight: 1.1 lbs. (.48 kg) * Dimensions: Length: 3.7 in. (9.4 cm), Width: 2.8 in. (7.1 cm), Height: 5.2 in. (13.2 cm) * 3 Volt Lithium, ½ AA (Digital Vacuum Gauge Models ONLY)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Gauge Range: PM3300: 0-200mmHg - Full Vacuum PM3300HV: 0-300mmHg - Max Vacuum PM3400: 0-150mmHg * Gauge Accuracy: Analog: ± 5% of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * Vacuum Ports: 1/8 NPT Female * Modes: LINE, OFF, REG * Maximum Vacuum: PM3300: REG. Mode @ Full Vac - 396 mmHg PM3400: Restricted to 170 mmHg (23 kPa) ± 10 mmHg * Weight: 1.1 lbs * Dimensions: 3.7in L x 2.8in W x 5.2in H * Battery: 3 Volt Lithium, ½ AA (Digital Vacuum Gauge Models ONLY)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Bottom Connection (inlet) - Tubing Nipple * Gauge Range: 0-300mmHg - Full Vacuum * Gauge Accuracy:Analog: ± 5% of MaxDigital Gauge: ± 1% of Full ScaleAnalog Gauge: ± 5% of MAX within ref. indicator * Maximum Vacuum:REG. Mode @ Full Vac - 396 mmHg * Weight: 1.1 lbs. (.48 kg) * Dimensions: 3.7 in. (9.4 cm), 2.8 in. (7.1 cm), 5.2 in. (13.2 cm)

Wye assembly with two 0-15 LPM chrome flowmeters.

No additional details available at this time.

Vac Trap features include: * Shatter Resistant Trogamid Bottle * Lightweight Nylon Float * Positive Shut-Off Disc Seal * Designed for Easy Disassembly * Hose Barb

Oxygen Regulator, Easy Dial, 0-15LPM, Yoke Style, Red Gauge Protector, Compact, 4-1/4 in Long, 7.8oz

O2 Quick Connect Adapter has a maximum pressure rating of 200 PSI.

The polycarbonate housings are extremely durable and impervious to chemical solutions normally used in a clinical setting preventing clouding and spidering. The polycarbonate flow tubes ensure durability. These flowmeters use black glass flow indicator balls with an exceptional sphericity and uniform weight contribute to a more accurate flowmeter than those using plastic floats. The highly accurate needle valves ensure precise flow-settings the first time...every time. The flow control knob is on the front of the flowmeter in clear sight of the operator unlike side mount knobs which are susceptible to damage during installation of additional equipment. The black glass float makes the flow setting easy to read. Specifications: * Scale: 0-15 LPM * Increments: * 0.5 LPM from 0.5 to 5 LPM * 1 LPM from 5 to 15 LPM * Accuracy: * ±0.25 LPM from 0.5 to 5 LPM * ±0.5 LPM above 6 to 15 LPM * Flush Flow: 60-80 LPM * Available with a variety of configurations (see item names and specifications)

The unique modular design makes repair a breeze for any biomed or central supply department. The unit is made up of six (6) easy-to-replace modular components. Unlike the normal plastic inlet and outlet connections on most units, the cast metal backplate connections are extremely durable, thereby saving unnecessary repair costs. As a result of its modular design, the unit is 25-50 percent smaller than other suction regulators making it the product of choice for crowded wall and rail areas. The case is made of strong ABS plastic. It features a smooth surface with rounded corners making cleaning easy. The case also houses the gauge for extra protection. The large control knob with its three (3) easy-to-read settings make vacuum adjustments simple, even in emergency situations. Specifications: * Bottom Connection (inlet) - Ohmeda Style Trap Bottle * Gauge Range: PM3300: 0-200mmHg - Full Vacuum PM3300HV: 0-300mmHg - Max Vacuum PM3400: 0-150mmHg * Gauge Accuracy: Analog: ± 5% of Max Digital Gauge: ± 1% of Full Scale Analog Gauge: ± 5% of MAX within ref. indicator * Modes: REG., OFF, INT. * Maximum Vacuum: PM3300: REG. Mode @ Full Vac - 396 mmHg (53 kPa) PM3400: Restricted to 170 mmHg (23 kPa) ± 10 mmHg (1.3 kPa) * Weight: 1.1 lbs. (.48 kg) * Dimensions: 3.7 in. (9.4 cm), 2.8 in. (7.1 cm), 5.2 in. (13.2 cm)

Vacuum Quick Connect Wye features include: * Ohmeda Wye Block Assembly - 2 Ohmeda Couplers * Maximum Pressure - 200 PSI * Primary Check Only

Wye Assembly features include: * Female Inlet * Wye block * Maximum Pressure - 200 PSI

90° Elbow Adapter designed for oxygen fitting.

Precision Medical® chrome body oxygen flowmeters are designed with polycarbonate housings and are extremely durable. They are impervious to chemical solutions normally used in a clinical setting preventing clouding and spidering. The polycarbonate flow tubes insure durability. The flowmeters use black glass flow indicator balls. Their exceptional sphericity and uniform weight contribute to a more accurate flowmeter than those using plastic floats. Highly accurate needle valves insure precise flow-settings the first time...every time. The flow control knob is on the front of the flowmeter in clear sight of the operator unlike side mount knobs which are susceptible to damage during installation of additional equipment. The black glass float makes the flow setting easy to read. Features: * Low flow: 0-3 LPM * Increments: .125 LPM from .125 to 1 LPM .25 LPM from 1 to 3 LPM * Accuracy: ±.15 l/min * Flush Flow: 20-40 LPM

Oxygen Quick Connect Adapter has a maximum pressure rating of 200 PSI and all pipe fittings are National Pipe Threads..

No additional details available at this time.

Nitrous Oxide quick connect with chemetron and DISS male connectors.

Hose designed for oxygen delivery.

No additional details available at this time.

Evacuation/WAGD Quick Connect Coupler has a maximum pressure rating of 200 PSI.

Vacuum Quick Connect Adapter has a maximum pressure rating of 200 PSI.

Hose designed for oxygen delivery.

Endotracheal Tube Holder features include: * Fully Padded * Sturdy Bite Block * Adjustable Strap