Ventilation Tubing & Accessories

Cable, Sensor, Coiled

RJ9 to 1/4in nurse call cable, open, for Trilogy Ventilators.

Hytrel smooth interior tubing with end fitting is autoclavable and reusable.

The Double Valve Auto-Fill Humidification Chamber is part of a complete system to warm and humidify inspired respiratory gases delivered to ventilated patients and those receiving respiratory support. The chamber is used in conjunction with a respiratory humidifier, breathing circuits and other accessories such as CPAP masks, high flow cannulas and nasal CPAP accessories. Features: Improved Responsiveness The lower water capacity enables rapid achievement of optimum operating temperature and minimizes fluctuations. Highly Compatible 22mm connectors allow compatibility with a wide range of ventilator circuits. Gas Flow Diverters Flow diverters optimize gas flow through the chamber, maximizing efficiency of warming and humidification of the gases. Heat Transfer Flat aluminium base for efficient, rapid and responsive water heating. Clear Construction Transparent construction with red floating fill indicator and clear markings for quick and easy monitoring of the water level. Compatible with Oscillating Ventilators The humidifier chamber is tested and performs with oscillating ventilators used in neonatal treatment. Overfill Protection Flexicare's Double Valve Auto-Fill Humidification Chamber features two independent floats and a primary and a secondary seal to regulate the flow of water into the chamber and provide assured protection against overfilling.

Tubing fits instruments made by Collins, Jaeger, Medical Graphics, Sensormedics. Tubes are individually bagged, clean - not sterile. Tubes made from ethylene vinyl acetate, contain no latex. Temperature range from -35 deg C to +60 deg C.

SMOOTH-FLO® CORR-A-TUBE® disposable tubing has a smooth internal surface to help prevent water from collecting in ridges. Its 22mm inside diameter end fitting adapts to most respiratory therapy applications.

The iFlow 200 S Proximal Flow Sensor is designed for adult and pediatric patients with single-patient use. Specifications: * Adult, Pediatric Patients * Single-patient use * Dead space: 10.3 mL * Range: 0 ± 180 L/min * Device connection: 22mm M x 15mm F * Patient connection: 15mm M

Corrugated Tubing, CORR-A-FLEX II, 100ft Roll, Cuttable Section Every 6 Inches, Blue

SpiroQuant A+ flow sensor is DEHP free and 100% Tested & Inspected with a reinforced design process.Replacement for: * Dräger [Narkomed, Fabius GS, Fabius, 6400, Babylog, Savina, Evita Family, Spirolog Sensor 8403735]

Disposable water trap designed for use with 22 mm tubing.

Water trap assembly features include: * Miniature Size * 5 Micron Filter * Manual Drain Valve * High Flow Capacity

This is a replacement membranes for integrated exhalation valve.

Patient Circuit for Newport HT70 Plus Ventilator Features: * Extra Long (15ft) * Disposable

Disposable, lightweight tubing featuring a corrugated exterior with a smooth interior. Features: * No internal corrugates for condensate to collect in * Smooth interior offers quiet passage of airflow even at high flow rates * 22-mm inside diameter adapts to most respiratory therapy applications * Individually packaged

Inline aerosol tee adapter for use with the Combivent® Respimat® inhaler. * Port Sizes: Inlet: 22mm O.D. Outlet: 22mm I.D. * Size: Length: 3 in Height: 2.4 in Body Width: 1 in Wye Angle: 45° Cap Width: 1.3 in (at widest point) * Materials: Body: Polystyrene-Butadiene Cap: Theromplastic Rubber * Color: Body: Clear Cap: Clear * Use: Single Patient Reuse (Can be used to deliver medication multiple times to a single patient while installed in a breathing circuit.)

Adult Water Trap is designed to ensure circuit patency at all times.Features: * Self-sealing lid * Threaded collection jar locks with quarter turn * Accepts standard 22mm ID tubing * 70cc capacity

AirLife® disposable corrugated tubing for aerosol and IPPB applications offers flexibility and convenience to meet therapeutic needs. Composed of polyethylene/ethyl vinyl acetate (EVA) plastic for strength and drapability. Cuffs on all tube ends lock to 7/8 inch connections.

High flow pressure relief valves with monitoring port.

Flexible Teflon Connector (transparent/white) designed with 15 mm Male by 15 mm Female ends. Ends are firmly threaded into the convolutions of the tubing making it easy to assemble connections of different lengths. Connector is inert, long-lasting, lightweight, flexible, translucent, and heat sterilizable.

Accutach™ Pneumotach Flow Sensor The Accutach sensor is a latex free, hypo-allergenic, flow sensing device. When placed in the line of the ventilator circuit the sensor accurately measures flow, volume, and pressures delivered to the patient. This disposable device provides differential pressure signals through the sensor ranges, precisely measuring ventilator settings and assuring the integrity of the patient circuit. The Accutach operates at the distal end of the ventilator circuit, locate between the patient Y and the endotracheal tube. The small dead space of 11 cc and the Accutach's light weight provide ideal patient monitoring. The Accutach comes as a complete package with a Flow Sensor, a pair of 72-inch color-coded ventilator panel lines, a 15 mm ID – 22 mm OD adapter, and a 22 mm tubing clip. Each device is packaged clean and must be calibrated prior to use. The Accutach was designed to work with the H7200 VR-1 monitor and the Galileo®, Amadeus&

The FloCap® is a single-use CO2 and flow indicator designed to visualize a patient® exhaled CO2 and expiratory flow. The CO2 colorimetric indicator helps caregivers verify proper endotracheal tube placement. The patent-pending spinner detects end of exhalation, which can help prevent breath stacking and its associated health implications during resuscitation. * Visual indication of air flow * Multi-colored CO2 indicator * Single-use

Single heated wire humidifier adapter lead for the FL-9000U Respiratory Humidifier.

Smooth interior tubing is disposable and can be stretched by 10%.

Features: * Exhalation valve with 22mm plug and drip cap. * End to the left is plugged. * End to the right is 22mm OD. * Diaphragm cap fits 1/8in ID tube. * Drip cap swivels 360° and is 22mm OD.