Pulse Ox Accessories

Retractable lanyard for the Vantage Onyx pulse oximeter.

Designed for use with Philips SpO₂ monitors and sensors, these 8-pin adapter cables are available in 1m (3.6ft) or 3m (9.8ft) lengths and features a D-sub connector. It adapts 9-pin sensors to 8-pin sockets. Specifications: * 8-pin to 9-pin adapter * Adapter cable * Use with Philips SpO2 Monitors * Available in 1 or 3 meter length

Wrist Band designed for WristOx2™ 3150 pulse oximeter.

Adapter cable for Masimo rainbow SET™ pulse oximetry helps to overcome the challenges of low perfusion and motion artifact that limit conventional pulse oximetry. This straight connector adapter cable is for use with LNCS SpO2 sensors. Masimo part number 3345. Note: Use only with Masimo rainbow™ enabled-monitors. Specifications: * Length: 10ft * Connection 1: Masimo RD SET 25-pin * Connection 2: Masimo D-Sub 9-pin Female Triple Keyed Connector * Adapter cable

Philips SpO2 Wrap Sensors are a low-adhesive, single-patient use SpO2 sensor. Made of a soft yet durable fabric, the sensors are designed to be gentle on the skin. Each sensor option is designed for specific placement based upon the patient's weight. The disposable clip sensor is ergonomically shaped to easily slip onto a patient's finger and designed to reposition easily. Its durability will last a single patient's average stay. The disposable wrap sensors contain minimal adhesive which reduces irritation for skin sensitivity. Its rugged design outlasts typical adhesive sensors. Features: * Single-patient SpO2 sensor * Accommodates patients from neonates to infants and adults * Designed for FAST-SpO2 * Durable and validated * Soft and flexible * Latex-free Specifications: * 73-989803205831: Adult Clip Sensor * Finger (Adult) * 73-989803205841: Infant Wrap Sensor * Finger/Toe (Infant) * 73-989803205851: Neonatal/Infant/Adult Wrap Sensor * Finger (Adult) * Big Toe/Thumb (Child) * Foot/Hand (Neonate) * 73-989803205861: Neonatal/Infant/Adult Wrap Sensor * Finger (Adult) * Big Toe/Thumb (Child) * Foot/Hand (Neonate) * Adhesive Free

Designed with an inclusive cable, sensor, and adhesive cloth wrap, Nonin 6000C Series disposable cloth pulse oximetry sensors provide ultimate comfort for patients requiring extended SpO2 and pulse rate monitoring and secure placement. The sensor design features a stretch, tear-resistant cloth for easier placement and fit on the patient, especially for hard-to-fit patients, ensuring consistent readings by keeping the sensor in the proper position. Each 6000C Series disposable sensor features Nonin PureLight® technology and Nonin PureSAT® signal processing to provide consistent results from patient to patient and sensor to sensor, even under challenging patient conditions such as low perfusion. Please note: WristOx2 3150 device is not included. Features: * Tamper-proof wristband * Disposable sensor * Disposable cloth wrap * Single Use * WristOx2 3150 device sold separately Key Benefits: * Illustrated finger guide ensures easy and accurate placement by caregiver or patient * Able to reposisition multiple times thanks to the tear resistant material * Latex free * Special adhesive allows the sensor to be repositioned multiple times as needed * Designed with comfortablility in mind with a breathable material

Philips Reusable Adult and Pediatric SpO2 Ear Clip Sensor M1194A measures perfusion at the ear for consistent SpO₂ data. Consistent measurements even in surgical and low-perfusion patients. It clips gently, yet securely, to the ear lobe and is suitable for patients weighing more than 40 kg (88 lbs). Specifications: * Sensor clips securely to the ear * Available with a cable measuring 1.5m * Durable and comfortable * For patients weighing more than 40 kg (88 lbs) * Reusable, multi-patient use * Designed for use with Philips Healthcare Equipment

Universal Extension Cable is a pulse oximeter accessory.

Cover, Battery Door, Nonin, 3150, WristOx2

PureLight® Flex Pulse Oximeter Sensor features include: * 25 Disposable FlexiWrap® Adhesives * 3m Cable * For use with the Nonin reusable Flex sensor

Philips SpO2 Clip Sensors effectively measure pulse oximetry in adults and children weighing more than 40 kg (88 lbs). The clip sensors are available as a finger sensor with multiple options for cable length to accommodate varied monitor placement. They are manufactured without latex. Specifications: * Sensor clips securely on the finger or ear * Available in multiple cable lengths – 90cm or 3m * Durable and tested * For patients weighing more than 40 kg (88 lbs) * Reusable, multi-patient use * Designed for use with Philips Healthcare Equipment Item #73-989803205911 features a 90cm cable and connects to 8-pin devices via adapter cables.

Philips Reusable Adult SpO2 Glove Sensors are manufactured without latex and are comfortable and easy to clean while delivering high signal quality to provide continuous oxygen saturation measurement. These sensors are designed for finger application on adults greater than 110lbs. Specifications: * Designed for adult use * Available with 2m or 3m cable * Reusable, Multi-Patient Use * Use with Philips Healthcare Equipment * Non-sterile Item #73-989803128591 features a 90cm cable and connects to 8-pin devices via adapter cables.

These single-use wristbands are for use with the Nonin WristOx2® models with a tamper-proof wristband closure. Reduces the spread of infection from patient to patient and patient to clinician. Eliminates need for cleaning accessories and potential variability in cleaning practices and efficacy.

Battery Door is a replacement part.

This Philips extension cable is an 8-pin to 8-pin input connector. It is 2m (6.56 ft) long is compatible with a wide variety of Philips products and not manufactured with natural rubber latex. The Philips adapter cable has been tested to make sure it withstands the pulling and twisting of rigorous use. Specifications: * Length: 2m * Number of Pins: 9-Pin * Sensor Compatibility: Philips

USB cable for interfacing with PCs for the WristOx.

Rainbow™ Series Patient Cables are for use only with instruments containing Masimo Rainbow SET® technology Version 7.0 or higher or licensed to use Rainbow compatible sensors. Note: Use only with Masimo rainbow™ enabled-monitors. Specifications: * Length: 4ft * Straight Connector * Connection 1: RD SET 25-pin * Connection 2: D-Sub 9-pin Female Triple Keyed Connector * Adapter cable

Battery Pack features include: * For PalmSAT 2500 pulse oximeters * Rechargeable * NiMH

Featuring Nonin PureSAT® SpO2 technology, the WristOx2 3150 USB delivers fast, accurate oxygen saturation and pulse rate readings in challenging conditions, including low perfusion and motion. The WristOx2 3150 USB is compatible with a wide range of Nonin PureLight® sensors and provides continuous, reliable SpO2 monitoring and data recording. Applications include overnight oximetry studies at home, in the hospital, and in sleep labs. Features: * Versatility & Ease to Use: Ideal for applications where small, portable oximetry is needed and Bluetooth® connectivity is not essential * Compact Design: Small size wears like a watch, with large display screen and enhanced sensor connector design * Enhanced Memory: 1,080 hours of non-volatile memory at a four-second sampling rate with additional high-resolution variable sampling options of one or two seconds * PureSAT Technology: Pulse-by-pulse averaging algorithm that is able to adjust with the patient's condition for precision accuracy. * Data Verification: Memory Volume Indicator (MVI) Mode provides a graphic display in hours and minutes, verifying that a sufficient amount of data has been recorded during oxygen qualification testing * Secure Data Transfer: Data can be transferred securely to nVISION® via USB connection * Exclusive Sensors: WristOx2 sensors are designed exclusively for use with WristOx2 3150 oximeters * Long Battery Life: Operates for 48 hours on two AAA batteries * Proven Durability: Dependable design and construction

The Reusable Neonatal SpO2 Wrap Sensor M1193A wraps securely on the hand or foot of neonatal patients weighing 1 - 4 kg (2.2 – 8.8 lbs) in its soft silicone material. The sensor is durable and comfortable and manufactured without latex. Specifications: * Sensor wraps securely on the hand or foot * Available with a cable measuring 1.5m * Durable and comfortable * For patients weighing 1 - 4 kg (2.2 – 8.8 lbs) * Reusable, multi-patient use * Manufactured with silicone * Latex-free * Designed for use with Philips Healthcare Equipment

Pole and Rail Clamp can be mounted vertically or horizontally .

Serial Output Cable designed for Model 7500 pulse oximeter.

Replacement Battery Door features include: * Plastic * Cream color

Carrying case designed in black. Durable, rugged case fits models 9840 and 8500 pulse oximeters.