ICU Medical

Carrying Case features include: * Electric Blue * Black Shoulder and Carry Straps * Molded Hangers for Stretchers

Portex® Hyperinflation System features include dual swivel or standard elbow and is non-sterile.

Each BLUselect® Suctionaid® tube is equipped with an additional lumen to allow effective removal of secretions above the cuff which minimizes the risk of aspiration. The suction lumen can be used to apply continuous or intermittent suction (thumb valve included) above the cuff. Thermosensitive material with initial rigidity for insertion will heat to body temperature and conform to the individual's upper respiratory tract to ensure minimal trauma. Comes with obturator, two inner cannulae, suction control valve, Velcro® trach tube holder, disconnect wedge, cleaning brush, and patient label. Features: * Laser printing on flanges for easy reading * Sizes on tubes and packages are indicated by color coding * DEHP free * Available in sizes 6.0-10mm * Cuffed * Non-Fenestrated

PEEP Valve, Portex, Disposable, 5-20 cm H2O, with 30 mm ID Connection

Berman Airways are sterile and disposable with two channels for suctioning. Features: * Multiple sizes and lengths * Sterile * Disposable * Individually Packaged

The flexible Hyperflex™ wire reinforced silicone shaft is designed for improved kink resistance. Packaged individually sterile with clip-in obturator and twill tracheostomy tie.Features: * Silicone remains soft and flexible in the trachea * Clip-in obturator with hollow tip allows for changing of tube over a guidewire * Wire reinforcement reduces kinking

Key Benefits: * Clear Plastic * NIF Port * Directional Arrows * Non-Rebreathing * 22 mm ID/15 mm OD Reducer * 4-in flex tube

Key Benefits: * 3.0mm ID/4.0 mmOD * Accessory Part * Multi-purpose

Heat and Moisture Exchangers exhibit low resistance to flow and high moisture output in ventilated or spontaneously breathing patients.Features: * Efficient heat and moisture recovery * ISO standard tapered ends to assure a consistent leak-free seal

Pediatric Airway Adapter designed for 8200, 8400, 8401, 9004 and 9200.

Blue Line® Uncuffed Nasal/Oral Endotracheal Tube features include: * Standard 15 mm ISO Connector * Uncuffed * Oral * Cut-to-Length * Siliconized PVC * Sterile

Neck Strap is an intubation accessory.

Filters exhaled gases from manual resuscitators and mouth-to-mask devices by connecting filter to exhalation port. 19 mm ID connector on one end; 19 mm OD x 30 ID mm connector on other end.

One-Way Valve features include: * 15 mm ID x 22 mm OD * Non-Sterile * Disposable

Battery Cover for paraPAC Plus ventilators. Includes label.

Ideal for short-term intubations, AIRCARE® tubes come with a standard 15 mm ISO connector.Features: * Made of transparent PVC * Radiopaque blue line for X-ray visualization * Oral or nasal intubation * Magill Curve * Murphy Eye * Latex Free * Sterile * Pre-Loaded Stylet

NIF-Tee® Reducer Adapter features include: * Clear Plastic * NIF Port * Directional Arrows * 22 mm ID/15 mm OD Reducer * 4-in flex tube

Lopez Valve® is a stopcock like device, that allows access to enteral systems without breaking open the lines. California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals such as vinyl chloride, ethylene oxide, bisphenol-A (BPA), diisodecyl phthalate (DIDP), and/or di(2-ethylhexyl) phthalate (DEHP) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. The above warning is required under California's Safe Drinking Water and Toxic Enforcement Act of 1986, more commonly known as 'Prop 65”. Some ICU products may be sterilized using ethylene oxide and some ICU intravenous tubing and drip chambers are manufactured using polyvinyl chloride (PVC) that may contain vinyl chloride, DIDP and/or DEHP. Also, certain manifold, stopcock, connector, and check valve products are manufactured using polycarbonates that may contain BPA. This shipment may contain one or more of these products.

Elbow Airway adapter for: * Capnocheck® Plus * Capnocheck® II Hand-Held Capnograph/Oximeter * Capnocheck® II Hand-Held Capnograph/Oximeter w/ Battery / Charger * Capnocheck® Plus - Capnograph Only * Advisor® Vital Signs Monitor

Reusable pulse oximeter finger sensor is used to noninvasively measure oxygen saturation and pulse rate.

Pulmonary Function Test Filter features include: * Filtration Efficiency: >99.9% * Resistance to Flow: <2.5 cm H2O/L/sec (over the flow range 0–14 L/sec) * Media: Electrostatically-charged polypropylene fibers * Weight: 33 grams * Dead Space: 55 ml * Connections: 30 mm OD (tapered) on patient end, 34 mm OD on machine end

PROTECTIV® Safety I.V. Catheter offers distinct product safety features, with documented results that prove its success in reducing accidental needlesticks. Most importantly, the choice of catheter materials, FEP polymer and radiopaque polyurethane, and needlepoint design of the PROTECTIV® Safety I.V. Catheter eases conversion to safety.Features: * Compatible with customary technique * Documented results proven to reduce accidental needlesticks * Universal color coded to indicate catheter gauge at a glance

Calibration Kit includes: * Calibration gas flow with regular gauge * 4ft CO2 sample line * Calibration adapter

The RSP neonatal/pediatric intubation system consists of an endotracheal tube, holder and 15 mm ISO connector. The RSP endotracheal tube is made of soft PVC with a Murphy eye and smooth beveled tip for atraumatic intubation. Tubes are marked every centimeter to aid in placement. With a flexible adhesive foam surface that affixes easily and securely to the patient, the tube holder allows for safe, quick, easy and re-adjustable positioning of the tube without re-taping. The sideport of the 15 mm ISO connector allows for the administration of medications and surfactants. Features: * Provides safe, quick and re-adjustable tube fixation * Allows for the administration of medication and surfactants * Designed to ease the difficulties associated with neonatal intubation