Blenders & Accessories

Molded diaphragm housing assembly for the PM5300 blender system.

SensO2 Blender Accessory for Oxygen Sensor Cell. Specifically designed for the Precision Medical line of blenders, and attaches to the left Primary outlet.

It's Unique

It is the only freestanding pneumatic HeliO2 blending device on the market today. The ability to turn the bleed control collar ON or OFF provides ± 3% FIO2 accuracy as well as quieter operation and maximal heliox tank durations.

It's Durable and Modular

The tough housing makes the unit durable and the selection control knob is recessed to prevent inadvertent changes in FIO2. The modular design can reduce maintenance time and costs. The unit can be easily maintained by all biomed departments.

It's Versatile and User-Friendly

The unit is available in four models, High-Flow 80/20 or 70/30 and Low-Flow 80/20 or 70/30. When paired with the optional cylinder clamp and pole, clinician setup time is greatly reduced and tank changes are easy. Multiple accessories can conform to clinician and patient needs.

It is the only freestanding pneumatic HeliO2 blending device on the market today. The ability to turn the bleed control collar ON or OFF provides ± 3% FIO2 accuracy as well as quieter operation and maximal heliox tank durations.

The tough housing makes the unit durable and the selection control knob is recessed to prevent inadvertent changes in FIO2. The modular design can reduce maintenance time and costs. The unit can be easily maintained by all biomed departments.

Sechrist air-oxygen gas mixers provide for precise mixing of air and oxygen for many clinical applications.

• The precise design of Sechrist mixers provides assurance of oxygen concentration accuracy within +/- 3 percentage point even in circumstances involving wide variances in supply gas pressures.
• Sechrist mixers incorporate integral filtration of supply gases. A 0.1-micron water trap/ filter is provided for the air inlet connection and both gas supply connections are protected by 7 micron sintered stainless steel (non-corroding) filters.
• In the event of a supply gas failure, an audible alarm is triggered as well as an assurance that gas from the remaining supply source will continue to be delivered.

Features include:

• Accuracy: +/-3%
• Maximum Flow: 40 LPM
• Bleed Flow: 2.5-4.5 LPM @ 8 LPM
• FIO2 Range: .21 + 0.1 to 1.0 - 0.1
• Gas Supply Range: 50 psi +/- 10 psi

Oxygen/Air blender features include:

• Flow Range: 2 to 120 LPM
• Input Port Fittings: DISS
• Output Port Fittings: DISS
• Output Port Flow Range:
  • Left – Plugged
  • Bottom – 15-120 LPM (no bleed)
  • 2-108 LPM (with bleed)
  • Side – 2-120 LPM (with bleed)
• Bleed for Flows <15 LPM: 12 LPM
• Size: 3.53 W x 5.3 H x 4.56 D inches
• Weight: 2.38 lbs

Oxygen/Air blender features include:

• Output Port Fittings: DISS
• Oxygen Concentration Range: 21-100%
• Accuracy: +/- 3% full scale
• Flow Range Accuracy: 0-30 lpm w/bleed active (right side port being used), 3-30 lpm w/no bleed active
• Size: 4.77 W x 5.3 H x 4.56 D inches
• Weight: 2.38 lbs

Control Knob replacement for MaxVenturi

Air/Oxygen High/Low Flow Blender Specifications:

• Flow Range: 2 to 120 LPM
• Input Port Fittings: DISS
• Output Port Fittings: DISS
• Output Port Flow Range:
  • Left – 15-120 LPM (no bleed)
  • 2-108 LPM (with bleed)
  • Bottom – 15-120 LPM (no bleed)
  • 2-108 LPM (with bleed)
  • Right – 2-108 LPM (with bleed)
• Bleed for Flows <15 LPM: 12 LPM
• Size: 4.8W x 5.4H x 4.6D inches (12.2W x 13.7H x 11.7D cm)
• Weight: 3.3 lbs. (1.5 kg)

MRI Air/Oxygen Low Flow Blender Specifications:

• Flow Range: 2 to 30LPM
• Input Port Fittings: DISS
• Output Port Fittings: DISS
• Output Port Flow Range:
  • Left – 3-30 LPM (no bleed)
  • 0-30 LPM (with bleed)
  • Bottom – Plugged
  • Right – 0-30 LPM (with bleed)
• Bleed for Flows <3 LPM: 3 LPM
• Size: 4.8W x 5.4H x 4.6D inches (12.2W x 13.7H x 11.7D cm)
• Weight: 3.2 lbs. (1.2 kg)

A 0-70 lpm flow meter is close mounted to the left side, and the right side features a 0-15 lpm flow meter that is still mounted closer than a typical flow meter mounted to a standard DISS port would be. This configuration provides the high range for pediatric and adult use, as well as the low range for neonatal use, and does so in a very compact blender. It is also as gas efficient as a High/Low Flow model can be since the bleed only needs to be activated when the Low Flow application is in use.

Specifications:

• Oxygen Concentration Range: 21 to 100%
• Number of Ports: 3 (2 occupied by flowmers plus a bottom port)
• Left Flowmeter Range: 15-70 lpm (2-70 if bleed flow is on-right flow meter is in upright position)
• Right Flowmeter Range: 2-15 lpm
• Accuracy: +/- 3% full scale
• Size: 7.98W x 6.64H x 4.56D inches (20.3W x 16.9H x 11.6D cm)
• Weight: 3.17 lbs. (1.44 kg)