Blenders & Accessories

Pole mount assembly designed for oxygen/air blender (PM5200 and PM5300).

Mobile blender system with PM5300 low flow blender. Includes pole stand with mounting bracket, monitor (optional), dual cylinder holder, basket, 3 ft of house for blender to tank, air regulator, and a 0-15 LPM flowmeter.

It is the only freestanding pneumatic HeliO2 blending device on the market today. The ability to turn the bleed control collar ON or OFF provides ± 3% FIO2 accuracy as well as quieter operation and maximal heliox tank durations. The tough housing makes the unit durable and the selection control knob is recessed to prevent inadvertent changes in FIO2. The modular design can reduce maintenance time and costs. The unit can be easily maintained by all biomed departments.

Dual cylinder holder for use with blender equipment.

Wall mount assembly designed for oxygen/air blender (PM5200 and PM5300).

Deluxe Pole Mount Blender Bracket fits rails, table tops, and poles from 3/4 inch to 1 1/2 inch diameter.

Primary outlet assembly for the PM5300 air blender.

Reusable Oxygen Sensor Tee Piece and DISS Female by DISS Male Oxygen. Sensor Tee easily connects any oxygen sensor to any flowmeter.

Condensation Trap designed for PM15 Air Compressor.

MRI Air/Oxygen Low Flow Blender Specifications: * Flow Range: 2 to 30LPM * Input Port Fittings: DISS * Output Port Fittings: DISS * Output Port Flow Range: * Left – 3-30 LPM (no bleed) * 0-30 LPM (with bleed) * Bottom – Plugged * Right – 0-30 LPM (with bleed) * Bleed for Flows <3 LPM: 3 LPM * Size: 4.8W x 5.4H x 4.6D inches (12.2W x 13.7H x 11.7D cm) * Weight: 3.2 lbs. (1.2 kg)

Sechrist air-oxygen gas mixers provide for precise mixing of air and oxygen for many clinical applications. * The precise design of Sechrist mixers provides assurance of oxygen concentration accuracy within +/- 3 percentage point even in circumstances involving wide variances in supply gas pressures. * Sechrist mixers incorporate integral filtration of supply gases. A 0.1-micron water trap/ filter is provided for the air inlet connection and both gas supply connections are protected by 7 micron sintered stainless steel (non-corroding) filters. * In the event of a supply gas failure, an audible alarm is triggered as well as an assurance that gas from the remaining supply source will continue to be delivered.Features include: * Accuracy: +/-3% * Maximum Flow: 40 LPM * Bleed Flow: 2.5-4.5 LPM @ 8 LPM * FIO2 Range: .21 + 0.1 to 1.0 - 0.1 * Gas Supply Range: 50 psi +/- 10 psi

Service Repair Kit is an accessory part as detailed in user manual. Used to service and maintain blender.

Service Repair Kit includes:* Diaphragm* Check Valve Assembly for Diaphragm* Alarm Assembly* Valve Assembly* Auxiliary Outlet Assembly* Oxygen and Air Inlet Assembly* Retaining Ring* O-Rings* Springs* Resistance Ring

Air/Oxygen High/Low Flow Blender Specifications: * Flow Range: 2 to 120 LPM * Input Port Fittings: DISS * Output Port Fittings: DISS * Output Port Flow Range: * Left – 15-120 LPM (no bleed) * 2-108 LPM (with bleed) * Bottom – 15-120 LPM (no bleed) * 2-108 LPM (with bleed) * Right – 2-108 LPM (with bleed) * Bleed for Flows <15 LPM: 12 LPM * Size: 4.8W x 5.4H x 4.6D inches (12.2W x 13.7H x 11.7D cm) * Weight: 3.3 lbs. (1.5 kg)

Vertical Pole Mount is an accessory part. Includes hand tight knob.

Bracket has stop pins in the slots to prevent blender from sliding through.

HeliO2 Blender is the only free-standing pneumatic blending device on the market today. Ability to turn bleed control collar ON or OFF provides +/- 3% FIO2 accuracy as well as quieter operation. HeliO2 Low Flow Blender features include: * FIO2 Range: 20-100% or 30-100% (see specific item detail) * Dimensions: 4.92in D x 2.25in W x 4.10in H * Weight: 2.9lbs * Operating Temperature: 59°F to 104°F * FIO2 Accuracy: +/-3% of full scale * Bypass Alarm Activation: 18-22 PSI (1.2-1.5 bar) * Primary Outlet Flow Range: 3-30 LPM * Auxiliary Outlet Flow Range: 0-30 LPM * Inlet Pressure Range: 30 - 75 PSI (2.1 - 5.2 bar); Heliox and Oxygen within 10 PSI (0.67 bar) of each other * Inlet Fitting: Female DISS or NIST * Bleed Flow at 50 psi (3.4 bar): 3 LPM or less * Maximum Combined Flow: ≥30 lpm * Primary Outlet Ports: 1 * Auxiliary Outlet Ports: 1 HeliO2 High Flow Blender features include: * FIO2 Range: 20-100% or 30-100% (see specific item detail) * Dimensions: 4.92in D x 2.25in W x 4.10in H * Weight: 2.9lbs * Operating Temperature: 59°F to 104°F * FIO2 Accuracy: +/-3% of full scale * Bypass Alarm Activation: 13-25 PSI (0.9-1.7 bar) * Primary Outlet Flow Range: 15-120 LPM * Auxiliary Outlet Flow Range: 2-100 LPM * Inlet Pressure Range: 30 - 75 PSI (2.1 - 5.2 bar); Heliox and Oxygen within 10 PSI (0.67 bar) of each other * Inlet Fitting: Female DISS or NIST * Bleed Flow at 50 psi (3.4 bar): 13 LPM or less * Maximum Combined Flow: ≥120 lpm * Primary Outlet Ports: 1 * Auxiliary Outlet Ports: 1

MRI Air/Oxygen High/Low Flow Blender Specifications: * Flow Range: 2 to 120LPM * Input Port Fittings: DISS * Output Port Fittings: DISS * Output Port Flow Range: * Left – 15-120 LPM (no bleed) * 2-108 LPM (with bleed) * Bottom – 15-120 LPM (no bleed) * 2-108 LPM (with bleed) * Right – 2-108 LPM (with bleed) * Bleed for Flows <15 LPM: 15 LPM * Size: 4.8W x 5.4H x 4.6D inches (12.2W x 13.7H x 11.7D cm) * Weight: 3.3 lbs. (1.5 kg)

Accessory basket for mobile blender systems.

SensO2 Blender Accessory for Oxygen Sensor Cell. Specifically designed for the Precision Medical line of blenders, and attaches to the left Primary outlet.

Audio Alarm Assembly is a replacement part as detailed in user manual.

Service kit for the PM5480 low flow Heliox blender.

High Flow Three-In-One Flowmeter Adapter. Versatile triple tubing connection adapter.

Accessory is a great solution for Blender and Oxygen Monitor. Kit mounts blender and oxygen monitor easily to heliox tank.