Humidification & Nebulization

The HFOT Flowmeter, Manifold and Bracket Set-Up. Set Includes: * (1) Quad block with one DISS hand tight O2 connection on top and three diss male one way valves on bottom * (1) 70LPM flowmeter, attached to pole mount * (2) 3ft O2 hoses, diss hand tight on both ends * (1) 9ft O2 hose, diss hand tight on both ends

UPS 90 Pure Hospital Transport Battery is an accessory for Bonhawa Humidifier. Features: * Models: HF110UPS90 Pure (Choose options: 100-120V, 220-240V or 90-110V) * Medical Grade: IEC 60601-1, IEC 62133-2, UL94 V0 compliant. * Pure Sine Wave: Compatible most biomedical equipment (i.e. heated humidifiers) * Line-Interactive UPS: Runs the device while charging the battery. Most biomedical devices will not reset with power interruptions (i.e. F&P Airvo2 and Oscillator 3100A). * Integrated Mounting Adapter: Very easy to mount with the standard mounting adapter. (i.e. fits the F&P Airvo 2 cart built-in bracket. (Note: Locking bracket available for a separate purchase.) * Low Battery Alarms: 3-stages at 20%, 10%, and 5% (audibly different). * Digital Battery Capacity Display * Low Battery Warning Lights: Battery power LED light visible from 6 feet away (green >25%, yellow 11% to 25% and red ≤10%). * Unlimited Linking: Can connect batteries in series to get as much run time as needed. * Powers Aerogen Simultaneously: Extra AC outlet and USB-A ports for both types of controllers. * Prevents Unplugging: Secure plugs with locking loops using zip ties. Red reusable zip ties included. * Silent Operation: Solid state cooling with no fan noise and no fan vent opening to trap germs. * Starts F&P Airvo 2 without plugging in the wall * Silicone cover (IP22 rated): Protect from liquid, dust, bumping and dropping damages. * Easy Disinfection: Disinfect with hospital wet wipes. * Maintenance Free: No preventative maintenance needed. Need to plug-in and charge battery when not in use. * Lifespan: 8 years * Warranty: 5 years (on purchases after 1/1/2025. Prior purchases are 2 year warranty) Specifications: * Battery is rechargeable * Digital Display * Weight = 5lbs * Power = 120V or 230V * Dimensions = 11.5in x 6.5in x 2in Device Compatibility: * Supports Telesair Bonhawa High Flow Oxygen Therapy (HFOT) System and other HFNC * 90 min at 37°C and 60/70 LPM * Heaters * 70 min at 37°C and 60 LPM * HFOV Oscillators * 90 min * Blood Gas Analyzers * 2 hours * Air Medical Equipment Backup * Airborne Isolette, Nitric Oxide, Vents, ECMO Pumps, Monitors, etc. * Nebulizer (AC or US B controller)

The Telesair® Heated Breathing Circuit Pack helps provide continuous humidity to dry gas and maintains heat and humidification of the gas during high flow oxygen therapy. The pack contains a single use intelligent water chamber adapter, a water chamber and a heated breathing circuit. Water Chamber: * Duration of use: 7 Days, Single-Patient * Designed for Pediatric, Adult patients * Fill Water Type: Automatically * Maximum Water Capacity: 150mL * Maximum Peak Flow: 180ml/min * Compatibility: ISO 80601-2-74 Heated Breathing Circuit: * Duration of use: 7 Days, Single-Patient * Designed for Pediatric, Adult patients * Circuit Length: 200 ± 20 cm * Compatibility ISO 5367, ISO 5356, ISO 80601-2-74, IEC 60601-1, IEC 60601-1-2

AirLife® prefilled humidifier features a dual-purpose reservoir with a snap-open trigger, which makes opening for secure attachment of humidifier adapter (included). Oxygen pathway designed to help prevent particulate from reaching oxygen delivery tubing. Audible relief valve warns if the patient´s tubing becomes occluded. Designed for convenient shelf storage, humidifier has a multiangle outlet port that prevents spitting, even at high flow rates, and a small bottle opening that prevents refilling. Includes an adapter and 4 psi pressure-relief valve with alarm.

Telesair® Ventilator Support Arm helps provide medication delivery with proper setup on the Bonhawa device. It is a sturdy support that helps secure attachment of the breathing circuit to the oxygen and water tubes with ease. Features: * Net Weight: 2.5-3 kg * Dimension (package): 60 x 48 x 10 cm * Load: 2 kg * Rotate: Press Button and Rotate * Material Steel, Aluminum and Alloy, Plastic * Length: 133 cm

These Dry Bubble Humidifiers provides effective and consistent results for your patients across the entire clinical flow range and incorporate unique features to address your everyday requirements. With the included High Flow Comfort Soft Plus™ Cannula, maximum comfort for the patient while virtually eliminating ear ulceration combined with a High Flow Humidifier that vastly reduces splash and residual solution in your oxygen tubing. Flow rates are not compromised by restrictions and resistance caused by excess condensate in the tubing, a common occurrence with industry competition.Features: * Pressure Relief ValveHumidifier Jar Engraved with Minimum/Maximum Water Level PointsUnique Baffling System to Minimize Splash Exiting into the TubeInterfaces with Oxygen Concentrator, Liquid O2 Systems, O2 Tanks and Wall Outlet ApplicationsHome Care, Hospital & Alternate Care Applications Recommended Flow Rates of up to 15 LPM

Mounting accessory pole clamp (30-55mm) for the FL-9000U Respiratory Humidifier.

Bags of Sterile Water for Inhalation and IV solutions can be easily confused, especially a 1-liter bag of 0.9% sodium chloride injection. The AMSure® Hanging Spikeable Bottle solves the problem of look-alike solution 'bags” and prevents mishaps from occurring. Benefits: * Rigid, plastic material easy to squeeze for priming * Hangar is located on the bottom of the bottle * 100% recyclable High-Density Polyethylene Features: * 1000mL Sterile Water for inhalation, USP * Used in heated humidifiers and high-flow oxygen therapy * Inverted label * Use with vented spikes only

AQUAPAK® prefilled humidifiers combine an easy-to-use adapter with choice of two sterile water reservoir bottle sizes. The micro-diffuser produces smaller bubbles and greater surface agitation for quiet operation and high humidity output. Humidifier adapters incorporate audible alarm to alert clinician to flow restriction or occlusion of humidifier or tubing. Reservoir bottles have built-in oxygen tubing connectors.

Dry Bubble Humidifiers provides effective and consistent results for your patients across the entire clinical flow range.Features: * Pressure Relief Valve * Humidifier Jar Engraved with Minimum/Maximum * Water Level Points * Interfaces with Oxygen Concentrator, Liquid O2 systems, O2 Tanks and Wall Outlet Applications * Home Care, Hospital and Alternate Care Applications

Suitable for invasive or non-invasive ventilation and heated or non-heated wire breathing circuits. Fully automatic for simple and rapid set-up, the FL-9000U Respiratory Humidifier has many advanced features, including the ability to change airway and chamber temperature settings within a given range, a selectable temperature display, alarm panel with location indicators and a range of safety features. Features: * Easy-connect wire and probe sockets of different design ensure correct connection. * Clear easy-to-read LED Display with the option to check Airway, Chamber or Heater Plate Temperature, or hold on a preferred parameter. * Comprehensible, color-coded identification lights for quick clinical resolution.

An oxygen tank holder for the Telesair® Medical Trolley Cart. * Holds up to two oxygen cylinders.

Telesair® Medical Trolley is equipped with a metal tray for the device and an extra storage shelf. The medical trolley comes in three pieces: base with castors, trolley, and blue pole basket. Features: * Trolley Size: 135~200 cm * Adjust Way: 60 x 60 x 200 cm * Overall Loadbearing Material: Aluminum alloy, stainless steel * Hook Load: 12 kg * Length: 4 kg (single hook 2 kg) * Castor: Five 3 in castors; two with brake

Telesair® Bonhawa High Flow Oxygen Therapy (HFOT) Air Filters. This is an accessory for Bonhawa Humidifier. Required for use to filter intake air. Visually inspect the filter after each patient and replace monthly. Packaged in a box of 30 individually wrapped. Features: * Material: Blended synthetic fiber * Biocompatibility: * ISO 10993-1, 18653-1 * ASTM Spec ASTM D737 * AVG BFE Efficiency: 99.9996% * AVG VFE Efficiency: 99.996% * Air Permeability: >125 CFM

Humidifier Adaptor, 040

Modudose unit dose saline for inhalation is offered in 3, 5, 10 and 15 mL sizes in 0.9% sodium chloride. Easy open - twist and pull. Contains no preservatives.

AQUAPAK® prefilled nebulizer is a versatile sterile system to provide cold or heated nebulization. It is a closed sterile water system. Benefits: * Increased safety in hygienic application * Facilitates daily handling * Efficiency and economy * Delivers humidified gas in concentrations ranging from 28% to 98%

Single heated wire humidifier adapter lead for the FL-9000U Respiratory Humidifier.

Ultra-fine disposable filter for Dreamstation PAP Therapy System.

AQUAPAK® prefilled humidifiers combine an easy-to-use adapter with choice of two sterile water reservoir bottle sizes. The micro-diffuser produces smaller bubbles and greater surface agitation for quiet operation and high humidity output. Humidifier adapters incorporate audible alarm to alert clinician to flow restriction or occlusion of humidifier or tubing. Reservoir bottles have built-in oxygen tubing connectors.

The HG 100 Humidifier Guard is designed to be used with humidifiers in ventilator circuits. It allows the safe removal of condensation and patient secretions from the inspiratory limb of a ventilator circuit to be collected and then easily removed by suction when necessary. As a result, there is no potential pressure loss in the ventilator circuit. The HG 100 Humidifier Guard CAN NOT be used during Magnetic Resonance Imaging (MRI) as some parts of the assembly are magnetic Features: * Single Patient Use * Maximum amount of collected fluids is 40ml * No potential pressure loss in the ventilator circuit * CANNOT be used during Magnetic Resonance Imaging (MRI) Dimensions: * Height: 3.25 in. (83mm) * Width: 3.5 in. (89mm) * Inlet Port: 22mm I.D. * Outlet Port: 22mm O.D. * Suction Port: 5/16 in. O.D. * Temperature Probe Port: 7.5mm I.D. Materials: * Body: Polycarbonate * Caps: Thermoplastic Elastomer * Color: Clear * Not made with Natural Rubber Latex * Not made with Di(2-ethylhexyl) phthalate (DEHP)

These Dry Bubble Humidifiers provides effective and consistent results for your patients across the entire clinical flow range and incorporate unique features to address your everyday requirements. With the included High Flow Comfort Soft Plus™ Cannula, maximum comfort for the patient while virtually eliminating ear ulceration combined with a High Flow Humidifier that vastly reduces splash and residual solution in your oxygen tubing. Flow rates are not compromised by restrictions and resistance caused by excess condensate in the tubing, a common occurrence with industry competition.Features: * Pressure Relief ValveHumidifier Jar Engraved with Minimum/Maximum Water Level PointsUnique Baffling System to Minimize Splash Exiting into the TubeInterfaces with Oxygen Concentrator, Liquid O2 Systems, O2 Tanks and Wall Outlet ApplicationsHome Care, Hospital & Alternate Care Applications Recommended Flow Rates of up to 15 LPM

Humidifier temperature probe lead for the FL-9000U Respiratory Humidifier.

Unit Dose features include: * Saline (0.9% NaCL) * for Inhalation * Graduated Vial