Anesthesia Associates

Head harnesses large holes permit ventilation but will not slip over small heads. Pressure is equally distributed over a large area.     

Reusable, fluted, breathing bag. Made from conductive black neoprene.

Made of chrome plated brass, connector tubes are durable and rugged. Available in 60 and 90 degree curves.

Mask elbow connections: * Machine end: 15 mm Male * Patient end: 15mmM x 22mmM/15mmF

Analog Wright Respirometers feature a push button style ON/OFF and RESET control. The units are designed with case seals and material selections to withstand ETO sterilization only. The respirometers have 22mm Male Inlet and Outlets. * Range: 0-100 liters * Material: Chromed Brass * Analog Dial (separate large and small dials) * Inlet and Outlet sizes: 22 mm Male

CPAP Mask Elbows with feed tube at top, spring-loaded pop-off adjustable valve, and 1/4in connection for pressure manometer. Kinetic energy of the incoming gases decreases dead space in the elbow because fresh gas tube is within 9/16" of the mask filling. Features: * Machine end: 15mm Male * Patient end: nominal 22mm Male and 15mm Female * Pop-off valve * Chrome plated brass * Latex-free

Flexible Teflon Connector (transparent/white) designed with 15 mm Male by 15 mm Female ends. Ends are firmly threaded into the convolutions of the tubing making it easy to assemble connections of different lengths. Connector is inert, long-lasting, lightweight, flexible, translucent, and heat sterilizable.

Respirometer Guard is designed to reduce physical damage due to dropping and abuse. Made out of attractive and durable - latex free Neoprene - that can be reliably sterilized. Shipped as a kit with two (2) case closure O-Rings, and is easily installed.

Digital Respirometers large LCD readout display eliminates the confusion of reading a mechanical respirometer dial. Flow sensing unit has only one moving part, and is detachable from the control unit for ease of sterilization and cleaning. Unit may be washed, gas sterilized or cold sterilized. Comes ready to use with included 9V battery and one (1) circuit adapter (22 mm FxF).* Range: 0-200 liters* Measurement Type: Air/Gas volume flow* Resolutions: 0.02 liter* Flow Rate: 5 LPM minimum/150 LPM maximum* Accuracy: ±2% at calibration point* Resistance to flow: 2 cm of water at 100 LPM* Inlet and Outlet sizes: 22 mm Male

Rugged and reusable manual jet ventilator system is designed for rigid-wall bronchoscopy, laryngeal micro-surgery, and emergency use.Manual jet ventilator consists of: * high pressure inlet tubing with 02 DISS fitting * flow control valve * thumb control valve * back-pressure gauge * 2 foot clear plastic outlet tubing with Luer Lock fitting for attachment of adapters and tubes * Hoses and inlet fitting are customizable to user needs

Abelson Jaw Spreader is intended for spreading the jaws in trismus associated with convulsive seizures or other Locked Jaw conditions.

Pole Clamp for the 00-294 and 00-295 Digital Respirometer. Clamp base attaches to the rear of the Controller using case screws. Allows Sensor to be connected while mounted. 1” max diameter.

Lightweight anodized aluminum bagtail bleed valve designed for replacement with Dupaco 32025.

Gardent tooth protectors are designed to protect teeth from impact and prying forces during intubation. They are molded in the USA using soft Santoprene TPE. Features: * Use during intubation * Adult patients * Disposable * Latex Free * MR Safe

Manometer features include:* 2.5 inch diameter chrome plated case* 1/4" NPT Male Bottom connection* Front zero correcting screw

Manometer with APL valve is the same as 07-00-199 Manometer but also includes:* Tee (1/4" tube)* APL valve adjustable from 0-55 cm H20 at 9 LPM

Key benefits: * A modification of the Wisconsin blade with a straight spatula and a large circular flange, designed primarily for use in infants. * The flange tends to be straighter and run parallel to the spatula. * The tip or beak of the Wis-Hipple is wider and well adapted for lifting the epiglottis. * 115mm * Infant, Size 1.5 * Stainless Steel

Magill forceps are made of highly-polished stainless steel. Closed tip (closes completely) and open eye design easily positions ETT’s during blind nasal intubation.

Replacement flow sensing unit, for digital respirometer. Flow sensing unit only with adapter fitting. For use with Digital Respirometer (07-00-295). Features: * Reusable * Latex-free * 22mm Male Inlet and Outlet * Flow Range: 5-150LPM * Accuracy: +/-2% at calibration point * Rugged and Sterilizable

Replacement control unit designed for electronic digital respirometer. Features: * Range: 0-200 liters * Measurement Type: Air/Gas volume flow * Resolutions: 0.02 liter * Flow Rate: 5 LPM minimum/150 LPM maximum * Accuracy: ±2% at calibration point * Resistance to flow: 2 cm of water at 100 LPM * Inlet and Outlet sizes: 22 mm Male

A ventilating system for MRI Suite airway emergencies. Tested MR Conditional to 3.0 Tesla. Consisting of 02 DISS fitting on 5 Inlet tubing attached to: - flow control valve- thumb control valve- Back-Pressure Gauge- and 2 clear plastic Outlet tubing with Luer Lock fitting (for attachment of adapters and tubes) connected to a malleable copper Outlet Stylette.

Williams Airway Intubator is indicated for use as:* Oropharyngeal airway* Means of intubating the trachea* Guide for fiber optic laryngoscope placement

Flexible, semi-transparent, 9/16" smooth I.D. spiral reinforced tubing. Ends are: rigid 15mm Male by Silicone 15mm Female. Autoclavable. Lightweight, Cream Colored Polyester (Latex Free), 12" overall length

This 36 inch breathing tube is made of spiral reinforced tubing with 22mm silicone female fittings at both ends.